Agency: Federal Aviation Administration
Pages: 1
[FR Doc 04-3130] 1. Airworthiness Directives; Boeing Model 727, 727-100C, 727-200F, and 727C
This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 727, 727100C, 727200F, and 727C series airplanes, that requires repetitive openhole high frequency eddy current inspections for cracks in the fuselage skin, strap (bearstrap), and doubler at the forward and aft hinge fittings for the main deck cargo door,
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3131] 2. Airworthiness Directives; Boeing Model 727, 727C, 727-100, and 727-100C
This amendment adopts a new airworthiness directive (AD), applicable to all Boeing Model 727, 727C, 727100, and 727100C series airplanes, that requires repetitive detailed and special detailed inspections for cracks in the web, inner chord, and outer chord of the forward and aft frames of the aft cargo door opening; and repair of any crack found.
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3202] 3. Airworthiness Directives; Boeing Model 737-100, -200, -200C, - 300, -400, and
This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 737100, 200, 200C, 300, 400, and 500 series airplanes, that requires replacing existing screw, nut, and washers that attach the latch cable assembly to the latch block assembly of the door mounted escape slides, with new, improved screw, nut, and washers.
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3348] 4. Airworthiness Directives; Boeing Model 737-300, -400, and -500 Series
This amendment supersedes an existing airworthiness directive (AD), applicable to certain Boeing Model 737 series airplanes, that currently requires a onetime general visual inspection of the seat locks and seat tracks of the flightcrew seats to ensure that the seats lock in position and to verify that lock nuts and bolts of adequate length are
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3204] 5. Airworthiness Directives; Dornier Model 328-100 Series Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to certain Dornier Model 328100 series airplanes, that requires a onetime inspection of certain engine control cables to determine the batch number on the end fitting, and replacement of affected cables with new cables. This action is necessary to prevent failure of defective
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3350] 6. Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER)
This document publishes in the Federal Register an amendment adopting airworthiness directive (AD) 20040251 that was sent previously to all known U.S. owners and operators of EMBRAER Model EMB 135 and 145 series airplanes by individual notices. This AD requires a onetime inspection of the aft rudder control rods to detect any discrepancy; a onetime
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3050] 7. Airworthiness Directives; The New Piper Aircraft, Inc. Model PA- 46-500TP
The FAA adopts a new airworthiness directive (AD) for certain The New Piper Aircraft, Inc. (Piper) Model PA46500TP airplanes. This AD requires you to replace all electronic control modules in the airplane electrical system with newly designed modules. This AD is the result of smoke in the cockpit and loss of electrical systems function. We are
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3351] 8. Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-7, PC- 12, and
The FAA adopts a new airworthiness directive (AD) that supersedes AD 20020109, which applies to all Pilatus Aircraft Ltd. (Pilatus) Models PC7, PC12, and PC12/45 airplanes that incorporate a certain enginedriven pump. AD 20020109 currently requires you to inspect the joints between the enginedriven pump housing, the relief valve housing, and the
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3203] 9. Airworthiness Directives; Raytheon Model Beech 400A and 400T Series
This amendment adopts a new airworthiness directive (AD), applicable to certain Raytheon Model Beech 400A and 400T series airplanes, that requires an inspection to determine the part number of the A194 roll trim printed circuit board (PCB), and replacement of certain PCBs with improved parts. This action is necessary to prevent intermittent
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
[FR Doc 04-3349] 10. Airworthiness Directives; Saab Model SAAB 2000 Series Airplanes
This amendment adopts a new airworthiness directive (AD),
applicable to certain Saab Model SAAB 2000 series airplanes, that
requires replacing the dual shuttle valve in the number 2 hydraulic
system with a new, improved valve. This action is necessary to prevent
failure of the dual shuttle valve in the number 2 hydraulic system, [[Page 7564]]
with
Published: 2004-02-18 DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration
Pages: 1