Browse: Departments Dates Agencies
AD ID: [AD-FRL-6866-3]
SUBJECT CATEGORY: National Emission Standards for Halogenated Solvent Cleaning
EFFECTIVE DATES: September 8, 2000.
DOCUMENT SUMMARY: This action promulgates corrections and several clarifications to the amendments to the ``National Emission Standards for Halogenated Solvent Cleaning'' promulgated on December 3, 1999 (64 FR 67793). The amendments finalized compliance options for continuous web cleaning. These corrections and clarifications ensure that all owners or operators of solvent cleaning machines have appropriate and understandable requirements for their cleaning machines.
SUMMARY: Halogenated solvent cleaning; corrections and clarifications,
World Wide Web (WWW). In addition to being available in the docket, an electronic copy of this proposed rule is also available on the WWW through the Technology Transfer Network (TTN). Following signature, a copy of the rule will be posted on the TTN's policy and guidance page for newly proposed or promulgated rules at http://www.epa.gov/ttn/ oarpg. The TTN provides information and technology exchange in various areas of air pollution control. If more information regarding the TTN is needed, call the TTN HELP line at (919) 5415384.
Regulated Entities. The following entities are potentially regulated by this final rule.
Examples of potentially regulated
Category SIC codes entities
Industry................................ 33, 34, 36, and 37......... Facilities engaging in cleaning
operations using halogenated solvent
cleaning machines.
This list is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action. This list includes the types of entities that EPA is now aware could potentially be regulated by this action. Other types of entities not listed could also be affected. To determine whether your facility or company is regulated by this final rule, you should carefully examine the applicability criteria in Sec. 63.460 of the promulgated rule. If you have any questions regarding the applicability of this final rule to a particular entity, consult the person listed in the preceding FOR FURTHER INFORMATION CONTACT section.
The purpose of this action is to provide corrections and several
clarifications to the December 3, 1999 (64 FR 67793) final rule changes
to the halogenated solvent cleaning national emission standards for
hazardous air pollutants (NESHAP). The corrections fix an incorrect cross reference included
[[Page 54420]]
in the revised regulatory text and add regulatory language that was
inadvertently omitted from the revised regulatory text. The
clarifications ensure that the original intent of the revised language
is clearly presented. These corrections and clarifications do not change any requirements for any sources.
II. What Corrections and Clarifications Are Included in This Action?
A. Corrected Cross Reference to Sec. 63.463(g)(3)(vii) and Clarification to Sec. 63.463(h)(2)(v)
Section 63.463(g)(3)(vii), which outlines requirements for continuous web cleaning machines that use an exhaust within the machine, included an incorrect cross reference. The reference to the carbon adsorber requirements of paragraph (e)(2)(ii) is a typographical error and should read (e)(2)(vii). This error is being corrected in today's action.
In addition, as stated in the December 3, 1999 Federal Register document preamble (64 FR 67795), EPA intended this section to allow for a carbon adsorption (CAD) system that meets either the 100 parts per million standard (i.e., Sec. 63.463(e)(2)(vii)) or the 70 percent efficient system (i.e., Sec. 63.463(g)(2)) requirement. Therefore, the reference to the 70 percent efficient system requirement has been added to Sec. 63.463(g)(3)(vii).
Section 63.463(h)(2)(v) for remote reservoir continuous web
cleaning machines was intended by EPA to be a parallel requirement to
Sec. 63.463(g)(3)(vii) for other continuous web cleaning machines. The
reference in Sec. 63.463(g)(3)(vii) to the CAD requirements was correct
in the December 3, 1999 Federal Register amendments. However, the
reference to the exhaust requirements could be misinterpreted.
Therefore, EPA is making the same clarifying revisions to reference the
70 percent efficient system requirements in Sec. 63.463(h)(2)(v) as discussed above.
B. Clarification That Sec. 63.463(e)(2)(vii) Applies to All Exhausts Within a Machine
The language in Sec. 63.463(e)(2)(vii) is being modified to be parallel to the language in Sec. 63.463(g)(3)(vii) and
Sec. 63.463(h)(2)(v). This clarifies EPA's intent that all exhausts
within any cleaning machine are required to be vented to a properly operated and maintained CAD system.
In Section III.B of the December 3, 1999 Federal Register preamble (64 FR 67796), EPA stated that steamheated units would no longer be required to have a device that shuts off the sump heat if the level drops to the sump heat coils. The EPA inadvertently omitted this change to Sec. 63.463(a)(4) from the promulgated changes. This omission has been corrected. In addition, a similar exclusion has been added to the parallel requirements for continuous web cleaning machines. D. Clarification That the New Alternative Standard Applies to Entire Cleaning Systems
When developing the alternative standard for continuous web cleaning machines in Sec. 63.463(d), EPA considered whether the option should apply to single or multiple continuous web cleaning machines. The EPA understood that some systems exist that would make compliance on an individual basis difficult or unnecessarily burdensome. For example, EPA learned of situations where more than one continuous web cleaning machine was routed through a single CAD system. The EPA did not want to preclude the use of such systems when they could comply with the maximum achievable control technology standard.
The compliance method included in Sec. 63.465(g) was selected
because it allowed for a determination of overall control efficiency of
a system, whether that system comprised one or multiple continuous web
cleaning machines. The ability to use Equation 8 in Sec. 63.465(h)(1)
for an entire system is clarified in Sec. 63.464(d). In addition, the
definitions of the variables for Equation 8 in Sec. 63.465(h)(1) have
been corrected to read ``solvent cleaning system'' instead of ``solvent cleaning machine.''
E. Clarification of the Term R
The term R
Through some questions from industry since the December 3, 1999
amendments were published, it has become apparent to EPA that the term
may be confusing. Some have questioned whether this term was meant to
cover all solvent that is recirculated through the system, including
liquid recycled through a distillation unit and solvent recovered from
the CAD system. It was never EPA's intent that R
The EPA is modifying Sec. 63.465(b) to remove an unnecessary cross
reference to Sec. 63.465(f). This reference is unnecessary since
Sec. 63.465(b) only refers to sources complying with the alternative
standards of Sec. 63.464, while paragraph (f) of Sec. 63.465 includes
requirements that only apply to sources complying with the standards in Sec. 63.463.
G. Addition of References to Sec. 63.463(h) in Sec. 63.463(e)
The EPA inadvertently excluded references to paragraph Sec. 63.463(h), which includes the requirements for remotereservoir continuous web cleaning machines, in the paragraphs that discussed the requirements for squeegee systems, airknife systems, and combine squeegee and airknife systems in Sec. 63.463(e). The EPA has corrected this oversight in today's action by revising the introductory paragraph to Sec. 63.463(e)(ix), (x), and (xi) to include a reference to Sec. 63.463(h).
The changes contained in these final rule amendments are
corrections and clarifications and do not change the intended coverage
of the halogenated solvent cleaning NESHAP (40 CFR part 63, subpart T).
These changes will not affect the estimated emissions reductions or the
control costs for these standards. These clarifications and corrections
should make it easier for owners and operators of affected sources and
for local and State authorities to understand and implement the requirements in 40 CFR part 63, subpart T.
IV. Administrative Requirements
Under Executive Order 12866 (58 FR 51735, October 4, 1993), EPA
must determine whether the regulatory action is ``significant'' and
therefore subject to review by the Office of Management and Budget (OMB) and the requirements of
[[Page 54421]]
the Executive Order. The Executive Order defines ``significant
regulatory action'' as one that is likely to result in a rule that may:
(1) Have an annual effect on the economy of $100 million or more or
adversely affect in a material way the economy, a sector of the
economy, productivity, competition, jobs, the environment, public
health or safety, or State, local, or tribal governments or communities;
(2) Create a serious inconsistency or otherwise interfere with an action taken or planned by another agency;
(3) Materially alter the budgetary impact of entitlements, grants,
user fees, or loan programs, or the rights and obligations of recipients thereof; or
(4) Raise novel legal or policy issues arising out of legal
mandates, the President's priorities, or the principles set forth in the Executive Order.
Pursuant to the terms of Executive Order 12866, it has been determined that this final rule does not qualify as a ``significant regulatory action'' under the terms of Executive Order 12866 and, therefore, is not subject to review by OMB.
Executive Order 13132, entitled ``Federalism'' (64 FR 43255, August 10, 1999), requires EPA to develop an accountable process to ensure ``meaningful and timely input by State and local officials in the development of regulatory policies that have federalism implications.'' ``Policies that have federalism implications'' is defined in the Executive Order to include regulations that have ``substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.''
Under section 6 of Executive Order 13132, EPA may not issue a regulation that has federalism implications, that imposes substantial direct compliance costs, and that is not required by statute, unless the Federal government provides the funds necessary to pay the direct compliance costs incurred by State and local governments, or EPA consults with State and local officials early in the process of developing the proposed regulation. The EPA also may not issue a regulation that has federalism implications and that preempts State law unless the Agency consults with State and local officials early in the process of developing the proposed regulation.
This final rule will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government, as specified in Executive Order 13132. This final rule only provides amendments to ensure that all owners or operators of solvent cleaning machines have appropriate and attainable requirements for their cleaning machines. Thus, the requirements of section 6 of the Executive Order do not apply to this rule. C. Executive Order 13084, Consultation and Coordination With Indian Tribal Governments
Under Executive Order 13084, EPA may not issue a regulation that is not required by statute, that significantly or uniquely affects the communities of Indian tribal governments, and that imposes substantial direct compliance costs on those communities, unless the Federal government provides the funds necessary to pay the direct compliance costs incurred by the tribal governments, or EPA consults with those governments.
If EPA complies by consulting, Executive Order 13084 requires EPA to provide to OMB, in a separately identified section of the preamble to the rule, a description of the extent of EPA's prior consultation with representatives of affected tribal governments, a summary of the nature of their concerns, and a statement supporting the need to issue the regulation.
In addition, Executive Order 13084 requires EPA to develop an effective process permitting elected officials and other
representatives of Indian tribal governments ``to provide meaningful
and timely input in the development of regulatory policies on matters that significantly or uniquely affect their communities.''
These final rule amendments do not impose any duties or compliance
costs on Indian tribal governments. Further, the final rule amendments
provided herein do not significantly alter the control standards
imposed by the halogenated solvent cleaning NESHAP for any source,
including any that may affect communities of the Indian tribal
governments. Hence, today's final rule amendments do not significantly
or uniquely affect the communities of Indian tribal governments.
Accordingly, the requirements of section 3(b) of Executive Order 13084 do not apply.
D. Executive Order 13045, Protection of Children From Environmental Health Risks and Safety Risks
Executive Order 13045, ``Protection of Children from Environmental Health Risks and Safety Risks'' (62 FR 19885, April 23, 1997) applies to any rule that: (1) Is determined to be ``economically significant'' as defined under Executive Order 12866; and (2) concerns an environmental health or safety risk that EPA has reason to believe may have a disproportionate effect on children. If the regulatory action meets both criteria, EPA must evaluate the environmental health or safety effects of the planned rule on children, and explain why the planned regulation is preferable to other potentially effective and reasonably feasible alternatives considered by the Agency.
The EPA interprets Executive Order 13045 as applying only to those regulatory actions that are based on health or safety risks, so that the analysis required under section 5501 of the Executive Order has the potential to influence the regulation. These final rule amendments are not subject to Executive Order 13045 because they are not an ``economically significant'' regulatory action as defined by Executive Order 12866 and are based on technology performance rather than health or risks that may disproportionately affect children.
Title II of the Unfunded Mandates Reform Act of 1995 (UMRA), Pub. L. 1044, establishes requirements for Federal agencies to assess the effects of their regulatory actions on State, local, and tribal governments and the private sector. Under section 202 of the UMRA, EPA generally must prepare a written statement, including a costbenefit analysis, for proposed and final rules with ``Federal mandates'' that may result in expenditures to State, local, and tribal governments, in aggregate, or by the private sector, of $100 million or more in any 1 year.
Before promulgating an EPA rule for which a written statement is needed, section 205 of the UMRA generally requires EPA to identify and consider a reasonable number of regulatory alternatives and adopt the leastcostly, most costeffective, or leastburdensome alternative that achieves the objectives of the rule. The provisions of section 205 do not apply when they are inconsistent with applicable law. Moreover, section 205 allows EPA to adopt an alternative other than the least costly, most costeffective, or leastburdensome alternative if the Administrator publishes with the final rule an explanation why that alternative was not adopted.
Before EPA establishes any regulatory requirements that may significantly or
[[Page 54422]]
uniquely affect small governments, including tribal governments, it
must have developed under section 203 of the UMRA a small government
agency plan. The plan must provide for notifying potentially affected
small governments, enabling officials of affected small governments to
have meaningful and timely input in the development of EPA regulatory
proposals with significant Federal intergovernmental mandates, and
informing, educating, and advising small governments on compliance with the regulatory requirements.
The EPA has determined that these final rule amendments do not contain a Federal mandate that may result in expenditures of $100 million or more for State, local, and tribal governments, in the aggregate or the private sector in any 1 year, and that these final rule amendments do not significantly or uniquely impact small governments, because they contain no requirements that apply to such governments or impose obligations upon them. The EPA has not prepared a budgetary impact statement or specifically addressed the selection of the leastcostly, most costeffective, or leastburdensome alternative.
In addition, because small governments will not be significantly or
uniquely affected by these final rule amendments, the EPA is not
required to develop a plan with regard to small governments. Therefore, the requirements of the UMRA do not apply.
F. Regulatory Flexibility Act (RFA), as Amended by the Small Business
Regulatory Enforcement Fairness Act of 1996 (SBREFA), 5 U.S.C. 601, et seq.
The RFA requires EPA to give special consideration to the effect of Federal regulations on small entities and to consider regulatory options that might mitigate any such impacts. The EPA must prepare a regulatory flexibility analysis unless EPA certifies that the rule will not have a ``significant impact on a substantial number of small entities.'' Small entities include small businesses, small notfor profit enterprises, and small government jurisdictions.
These final rule amendments would not have a significant impact on a substantial number of small entities because they clarify and make corrections to the promulgated halogenated solvent cleaning NESHAP, but impose no additional regulatory requirements on owners or operators of affected sources.
The Information Collection Request (ICR) was submitted to the OMB under the Paperwork Reduction Act (44 U.S.C. 3501, et seq.) at the time this rule was originally promulgated. These final rule amendments to the halogenated solvent cleaning NESHAP will have no impact on the information collection burden estimates made previously. Therefore, the ICR has not been revised.
Section 12(d) of the National Technology Transfer and Advancement Act of 1995 (NTTAA), Pub. L. 104113, section 12(d) (15 U.S.C. 272 note), directs all Federal agencies to use voluntary consensus standards in their regulatory and procurement activities unless to do so would be inconsistent with applicable law or otherwise impractical. Voluntary consensus standards are technical standards (e.g., material specifications, test methods, sampling procedures, business practices, etc.) that are developed or adopted by one or more voluntary consensus standards bodies. The NTTAA directs EPA to provide Congress, through annual reports to OMB, with explanations when EPA does not use available and applicable voluntary consensus standards. This action does not involve the proposal of any new technical standards. I. Congressional Review Act
The Congressional Review Act, 5 U.S.C. 801, et seq., as added by the SBREFA, generally provides that before a rule may take effect, the agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and to the Comptroller General of the United States. The EPA will submit a report containing this final rule and other required information to the United States Senate, the United States House of Representatives, and the Comptroller General of the United States prior to publication of this rule in the Federal Register. A major rule cannot take effect until 60 days after it is published in the Federal Register. These final amendments are not a ``major rule'' as defined by 5 U.S.C. 804(2). List of Subjects in 40 CFR Part 63
Environmental protection, Air pollution control, Continuous web
cleaning, Film cleaning, Halogenated solvent cleaning machines, Hazardous substances.
Dated: August 29, 2000.
Robert D. Brenner,
For the reasons set out in the preamble, title 40, chapter I, part 63 of the Code of Federal Regulations is amended as follows: PART 63[AMENDED]
1. The authority for part 63 continues to read as follows:
Authority: 42 U.S.C. 7401, et seq.
Subpart TNational Emission Standards for Halogenated Solvent Cleaning
2. Section 63.463 is amended by:
a. Revising paragraph (a)(4);
b. Revising paragraph (d)(10);
c. Revising paragraphs (e) introductory text, (e)(2)(vii) introductory text, (ix) introductory text, (x) introductory text, and (xi) introductory text;
d. Revising paragraphs (g)(3)(iv) and (vii); and
e. Revising paragraph (h)(2)(v).
The revisions read as follows:
Sec. 63.463 Batch vapor and inline cleaning machine standards. (a) * * *
(4) Each vapor cleaning machine shall be equipped with a device
that shuts off the sump heat if the sump liquid solvent level drops to
the sump heater coils. This requirement does not apply to a vapor cleaning machine that uses steam to heat the solvent.
* * * * *
(d) * * *
(10) Each operator of a solvent cleaning machine shall complete and
pass the applicable sections of the test of solvent cleaning procedures
in appendix A to this part if requested during an inspection by the Administrator.
* * * * *
(e) Each owner or operator of a solvent cleaning machine complying
with paragraph (b), (c), (g), or (h) of this section shall comply with
the requirements specified in paragraphs (e)(1) through (4) of this section.
* * * * *
(2) * * *
(vii) If a carbon adsorber in conjunction with a lip exhaust or
other exhaust internal to the cleaning machine is used to comply with
these standards, the owner or operator shall comply with the following requirements:
* * * * *
(ix) If a squeegee system is used to comply with the continuous web [[Page 54423]]
cleaning requirements of paragraph (g)(3)(iii) or (h)(2)(i) of this
section, the owner or operator shall comply with the following requirements.
* * * * *
(x) If an air knife system is used to comply with the continuous
web cleaning requirements of paragraph (g)(3)(iii) or (h)(2)(i) of this
section, the owner or operator shall comply with the following requirements.
* * * * *
(xi) If a combination squeegee and air knife system is used to
comply with the continuous web cleaning requirements of paragraph
(g)(3)(iii) or (h)(2)(i) of this section, the owner or operator shall comply with the following requirements.
* * * * *
(g) * * *
(3) * * *
(iv) Each vapor cleaning machine shall be equipped with a device
that shuts off the sump heat if the sump liquid solvent level drops to
the sump heater coils. This requirement does not apply to a vapor cleaning machine that uses steam to heat the solvent.
* * * * *
(vii) Each cleaning machine that uses a lip exhaust or any other
exhaust within the solvent cleaning machine shall be designed and
operated to route all collected solvent vapors through a properly
operated and maintained carbon adsorber that meets the requirements of either paragraph (e)(2)(vii) or (g)(2) of this section.
* * * * *
(h) * * *
(2) * * *
(v) Each cleaning machine that uses a lip exhaust or any other
exhaust within the solvent cleaning machine shall be designed and
operated to route all collected solvent vapors through a properly
operated and maintained carbon adsorber that meets the requirements of either paragraph (e)(2)(vii) or (g)(2) of this section.
3. Section 63.464 is amended by revising paragraph (d) to read as follows:
Sec. 63.464 Alternative standards.
* * * * *
(d) As an alternative to meeting the requirements in Sec. 63.463,
each owner or operator of a continuous web cleaning machine can
demonstrate an overall cleaning system control efficiency of 70 percent
or greater using the procedures in Sec. 63.465(g). This demonstration
can be made for either a single cleaning machine or for a solvent
cleaning system that contains one or more cleaning machines and
ancillary equipment, such as storage tanks and distillation units. If
the demonstration is made for a cleaning system, the facility must
identify any modifications required to the procedures in Sec. 63.465(g) and they must be approved by the Administrator.
4. Section 63.465 is amended by revising paragraph (b) and (h)(1) to read as follows:
Sec. 63.465 Test methods.
* * * * *
(b) Except as provided in paragraph (g) of this section for
continuous web cleaning machines, each owner or operator of a batch
vapor or inline solvent cleaning machine complying with Sec. 63.464
shall, on the first operating day of every month ensure that the
solvent cleaning machine system contains only clean liquid solvent.
This includes, but is not limited to, fresh unused solvent, recycled
solvent, and used solvent that has been cleaned of soils. A fill line
must be indicated during the first month the measurements are made. The
solvent level within the machine must be returned to the same fillline
each month, immediately prior to calculating monthly emissions as
specified in paragraph (c) of this section. The solvent cleaning
machine does not have to be emptied and filled with fresh unused solvent prior to the calculations.
* * * * *
(h) * * *
(1) Using the records of all solvent additions, solvent deletions,
and solvent recovered from the carbon adsorption system for the
previous monthly reporting period required under Sec. 63.467(e), determine the overall cleaning system control efficiency
(E
Where:
E
Sa
SSR
[FR Doc. 0022974 Filed 9700; 8:45 am]
BILLING CODE 656050P
FOR FURTHER INFORMATION CONTACT For information concerning the standards, contact Mr. Paul Almodovar, Coatings and Consumer Products Group, Emission Standards Division (MD13), U.S. Environmental Protection Agency, Research Triangle Park, North Carolina 27711, telephone number (919) 5410283.
For information regarding the applicability of this action to a particular entity, contact Ms. Acquanetta Delaney, Manufacturing Branch, Office of Compliance (2224A), U.S. Environmental Protection Agency, 1200 Pennsylvania Avenue, NW, Washington, DC 20460; telephone (202) 5647061.
14 CFR Part 39 40 CFR Part 52 14 CFR Part 71 33 CFR Part 165 50 CFR Part 679 26 CFR Part 1 40 CFR Part 180 47 CFR Part 73 50 CFR Part 17 33 CFR Part 117 44 CFR Part 67 50 CFR Part 648 14 CFR Part 97 33 CFR Part 100 40 CFR Part 63 50 CFR Part 622 26 CFR Part 301 39 CFR Part 111 40 CFR Part 300 50 CFR Part 660 44 CFR Part 65 40 CFR Parts 52 and 81 40 CFR Part 271 47 CFR Part 64 50 CFR Part 665 47 CFR Part 76 50 CFR Part 229 14 CFR Part 23 14 CFR Part 25 21 CFR Part 522