Federal Register: December 20, 2001 (Volume 66, Number 245)
DOCID: FR Doc 01-31293
FEDERAL ELECTION COMMISSION
Federal Election Commission
DOCUMENT ID: [Notice 2001-19]
NOTICE: NOTICES
DOCUMENT ACTION: Notice with request for comments.
SUBJECT CATEGORY:
Voluntary Standards for Computerized Voting Systems
DATES: Comments must be received on or before February 1, 2002.
DOCUMENT SUMMARY:
The Federal Election Commission (the ``FEC'') requests comments on the second draft of the revisions to the 1990 national voluntary performance standards for computerized voting systems and the first draft of the revisions to the 1990 national test standards. Please note that these drafts do not represent a final decision by the Commission. The FEC will publish a Federal Register notice when both volumes of the final revised standards are issued. Note also that the text of the final documents will not become part of the Code of Federal Regulations because they are intended only as guidelines for states and voting system vendors. States may mandate the specifications and procedures through their own statutes, regulations, or administrative rules. Voting system vendors may voluntarily adhere to the standards to ensure the reliability, accuracy, and integrity of their products. Further information is provided in the supplementary information that follows.
SUMMARY:
Computerized voting systems; voluntary standards; comment request,
SUPPLEMENTAL INFORMATION
In 1990, the FEC and its Office of Election
Administration promulgated standards for computerized election
equipment pursuant to its responsibilities under 2 U.S.C 438(a)(10),
which requires the FEC to ``serve as a national clearinghouse for the
compilation and review of procedures with respect to the administration
of Federal elections.'' The resulting product is the Voting System Standards (the ``Standards'').
[[Page 65709]]
Although voluntary, the Standards have been adopted in 38 states in
whole or in part and are used to design systems and procure equipment
to meet the needs of diverse jurisdictions serving a wide variety of voting populations and election formats.
The Standards are designed to provide technical specifications and documentation requirements to vendors that intend to sell systems in the states that require compliance with the Standards. In order to show compliance, a vendor must submit its system for qualification testing. The qualification testing is done through an Independent Testing Authority (``ITA'') that has been certified by the National Association of State Election Directors (``NASED''). Once a system has completed the ITA process, it receives a NASED Qualified identification number. In order to maintain its status as a NASED qualified system, the hardware and software must be identical to the hardware and software tested by the ITA.
The Standards are designed to guide development of computerized voting systems. To this extent, the only voting systems that are addressed in the Standards are electronic DRE systems and paperbased systems that utilize electronic technology to count ballots. The Standards do not address lever machines systems, as there are currently no manufacturers that design systems using such machines.
Periodic revisions to the Standards are necessary to reflect the development of emerging technology in voting systems and design innovations. Increasingly, voting system vendors are designing systems that use electronic and telecommunications components not addressed in the original standards. As a result, proposed revisions have been developed by the FEC that reflect the technologies contemplated by the voting system industry. Also, the Standards acknowledge the impact of the Americans with Disabilities Act and provide specifications so that voting system vendors can design systems that allow a voter with a disability to exercise his or her democratically protected right to vote.
Additionally, the revised Standards incorporate a broadened understanding of what constitutes a voting system by including not just the machine used by voters to cast ballots, but also certain components of the Election Management System (EMS), the telecommunications system (where applicable), and the ballot counting system. The revised Standards augment the requirements for the EMS, addressing preparation of the ballot, electionspecific coding of software, and vote consolidation and reporting processes. The Standards do not provide guidance to computerized election database systems that are not part of the voting system itself. Such systems include voter registration databases and other consolidated databases used by election officials. The FEC's Office of Election Administration has produced other documents, available upon request, that can assist election officials and other interested parties in developing and maintaining such systems.
The FEC recognizes that human interface considerations are an integral part of developing an accurate, reliable voting system. The FEC has allocated funds to investigate human factors issues and is developing specifications that can be used in conjunction with both the Standards and other FEC operational and management guidelines to ensure that human factors considerations are given an important place in the development and procurement of voting systems.
The 1990 Standards were released as a single volume. However, the new Standards are divided into two volumes, both included in this release. Volume I provides functional and technical requirements for a number of system types and configurations. Volume II provides testing specifications for the requirements of Volume I.
On July 10, 2001, the Commission published a Federal Register notice requesting comments on the first draft of Volume I of the revised Standards. 66 FR 35978. Public comment was significant in both volume and content. Over 350 comments from over 40 commentators provided ideas and approaches to the Standards that greatly enhance their use by vendors, election officials, and voters. Because of this feedback, substantive changes were made to Volume I and a second draft of this document is being released for additional public comment. Although many of the comments on Volume I were helpful in devising the content of Volume II, this will be the first opportunity for the public to comment on its specific content.
The documents released with this notice include an Overview document, Volume I of the Standards (containing nine sections and three appendices), and Volume II of the Standards (containing seven sections and four appendices). The overview document explains in detail the history of the Standards project, provides a description of how the Standards fit into the election vending process, and gives an explanation of the reasoning behind the inclusions and exclusions of various systems, requirements, and test methods. Volume I of the Standards contains functional requirements (Section 2) that outline system benchmarks. The Standards also anticipate an increased demand for equipment that meets the needs of people with disabilities. In order to address these needs, the FEC consulted with the Access Board, the federal agency that developed access guidelines for federal information technology, to produce specific requirements to help guide vendors in the development of systems that increase accessibility to voters with disabilities (Section 2.6).
The Standards provide specific requirements for system software
(Section 3) and hardware (Section 4). Additionally, the Standards
anticipate that voting systems will move increasingly towards the use
of telecommunications to cast ballots, consolidate vote data, and
report results. As such, two sections of Volume I of the Standards
outline requirements to guide selection of proper telecommunications equipment (Section 5) and ensure that the introduction of
telecommunications equipment does not compromise the security and
secrecy demanded by the election process (Section 6). Section 6 also
addresses security and secrecy requirements for a voting system's
software, hardware, and administrative procedures (as specified by the vendor).
Volume I of the Standards also provides information on quality assurance (Section 7) and configuration management issues (Section 8). These sections are tailored towards the unique needs of the election system industry, and are designed to provide guidance in sound management practices without posing an undue burden on small companies that have traditionally formed the backbone of the election system industry.
Section 9 of Volume I of the Standards provides an introduction and overview to the testing process necessary for a system to be qualified. The testing processes and specifications themselves are found in the body of Volume II.
Ultimately, the Standards are only a component of the necessary
steps to ensure reliable, accurate, and secure elections. A qualified
system has passed certain benchmarks for accuracy and reliability, but
this is not sufficient to ensure overall system reliability unless
jurisdictions who purchase the system use sound procurement and
management practices to ensure that the system's security, accuracy,
and reliability are protected during the election cycle itself. Because such practices are related to the actions of
[[Page 65710]]
voting officials rather than vendors, they are clearly outside the
scope of the Standards. However, the Standards mandate a significant
amount of disclosure from vendors in order to provide a clear
understanding to election officials of how the system can be optimally operated.
The FEC invites all interested parties to submit comments. It is
requested that each commenter indicate if he or she is willing to
appear before the Commission. The FEC asks that, where appropriate,
submitted comments reference the specific sections of the Standards
that are germane to the submitted comment. Additionally, the FEC
requests that comments regarding specific content be accompanied by
specific suggestions for alterations to language or technical
specifications, so that the Commission may consider changes that best
reflect the intent of the commenter. Comments suggesting the use of
alternate industry standards should provide the standard industry reference.
Dated: December 14, 2001.
Karl Sandstrom,
Commissioner, Federal Election Commission.
[FR Doc. 0131293 Filed 121901; 8:45 am]
BILLING CODE 671501P
FOR FURTHER INFORMATION CONTACT
Ms. Penelope Bonsall, Director, Office of Election Administration, 999 E. Street, NW., Washington, DC 20463; Telephone: (202) 6941095; Toll free (800) 4249530, extension 1095.