Browse: Departments Dates Agencies
Docket ID: [Docket No. 01D-0514]
SUBJECT CATEGORY: Medical Devices; Guidance on Labeling of Reprocessed Single Use Devices; Request for Comments and Information
DOCUMENT SUMMARY: The Food and Drug Administration (FDA) is providing an opportunity for interested persons to submit comments and suggestions on the contents of a guidance document that FDA is considering drafting on the labeling of reprocessed single use devices (SUDs) with respect to the name of the original equipment manufacturer (OEM) and the remanufacturer (i.e., reprocessor). FDA is publishing this notice in order to gather informed comment before drafting the guidance.
SUMMARY: Medical devices—; Reprocessed single use devices; labeling; comment request,
In a citizen petition, dated March 22, 2001, the Association of Disposable Device Manufacturers (ADDM) requested that FDA: (1) Require reprocessors of SUDs (hereinafter referred to as reprocessed devices) to remove the OEM trademark from the devices and any references to the OEM in the label of devices; (2) take actions to identify and enforce this requirement; and (3) refuse to approve premarket submissions unless the applicant represents that the device will meet this requirement.
On September 17, 2001, FDA issued a response to this petition. FDA
denied the petition because FDA believed that misleading implications
from representations concerning the OEM may be remedied by the disclosure of
[[Page 65724]]
additional facts about the remanufacturer. Specifically, FDA stated:
FDA, however, does believe that representations concerning the
OEM may be misleading unless the reprocessor of a single use device
provides additional information that would indicate that the
reprocessor is the manufacturer responsible for product problems. As
you note in your petition, hospitals and other user facilities must
alert FDA or the manufacturer whenever there is information that
``reasonably suggests that a device has or may have caused or
contributed to the death ... [or] serious injury to a patient ...''
21 CFR 803.30(a). Moreover, the user or FDA may need to know the
identity of the manufacturer, not only for the purposes of reporting adverse events to FDA, but to assure that the responsible
manufacturer or FDA can investigate the problem to determine if
additional steps should be taken, including distribution of safety
information to the users, or product recalls. Accordingly, FDA believes that when a reprocessed product's labeling makes
representations that suggest the OEM should be notified of product
problems, additional information that provides the correct identity
of the reprocessor as the remanufacturer who is responsible for
adverse event reporting, recalls, or other corrective actions, is
``material'' information within the meaning of section 201(n) of the
Act because such information is necessary to enable FDA's postmarket
reporting procedures under section 519 of the Act to function effectively.
In the response to the petition, FDA also said that it would publish a guidance document that will recommend more specific language and direction to regulated industry on this matter. Before it develops this guidance document, FDA is inviting interested persons to submit comments and suggestions on the contents of such a guidance.
The ADDM petition and FDA's response are available from the Dockets Management Branch (address above). Please reference Docket No. 01P 0148.
Interested persons may submit to the Dockets Management Branch (address above) written or electronic comments or suggestions regarding this issue by March 20, 2002. Two copies of any comments are to be submitted, except that individuals may submit one copy. Comments are to be identified with the docket number found in brackets in the heading of this document. Received comments may be seen in the Dockets Management Branch between 9 a.m. and 4 p.m., Monday through Friday.
Dated: November 28, 2001.
Linda S. Kahan,
Deputy Director, Center for Devices and Radiological Health.
[FR Doc. 0131334 Filed 121901; 8:45 am]
BILLING CODE 416001S
FOR FURTHER INFORMATION CONTACT Larry Spears, Center for Devices and Radiological Health (HFZ300), Food and Drug Administration, 2094 Gaither Rd., Rockville, MD 20850, 3015944692.
14 CFR Part 39 40 CFR Part 52 14 CFR Part 71 33 CFR Part 165 50 CFR Part 679 47 CFR Part 73 26 CFR Part 1 40 CFR Part 180 33 CFR Part 117 50 CFR Part 17 44 CFR Part 67 50 CFR Part 648 14 CFR Part 97 40 CFR Part 63 33 CFR Part 100 50 CFR Part 622 50 CFR Part 660 26 CFR Part 301 44 CFR Part 65 39 CFR Part 111 40 CFR Part 300 6 CFR Part 5 40 CFR Part 271 47 CFR Part 64 40 CFR Parts 52 and 81 50 CFR Part 665 10 CFR Part 50 44 CFR Part 64 49 CFR Part 571 39 CFR Part 3020