Federal Register: January 21, 2003 (Volume 68, Number 13)
DOCID: FR Doc 03-1156
POSTAL SERVICE
Postal Service
CFR Citation: 39 CFR Part 501
NOTICE: RULES
ACTION: Postage meters:
DOCUMENT ACTION: Final rule.
SUBJECT CATEGORY:
Authorization To Manufacture and Distribute Postage Meters
DATES: The rule is effective January 21, 2003.
DOCUMENT SUMMARY:
This final rule amends the regulations for postage meter inventory control and for the protection and control of security related processes and components. A desire to enhance the security of Postal Service revenues motivates these changes. The rule will improve the secure handling of postage meters and their security components by the approved postage meter manufacturers, and will extend the regulations to thirdparty agents and representatives of the manufacturers.
SUMMARY:
Manufacture and distribution; authorization,
SUPPLEMENTAL INFORMATION
The proposed rule was published in the Federal Register on April 24, 2002 (67 FR 20077), with a request for submission of comments by May 24, 2002. We received three submissions in response to the solicitation of public comments. The Postal Service gave thorough consideration to the comments it received, modified the proposed rule as appropriate in response to the comments, and now announces adoption of the final rule. We will amend the remaining sections of title 39 CFR part 501 in the near future so that they reflect the changes in the postage meter population and recent changes to regulations published in the Domestic Mail Manual regarding postage meters and other postage evidencing systems.
Discussion of Comments
1. One commenter noted that since the Postal Service has control over all distributors of postage meters through the manufacturers, the amendments to the existing regulations make sense only if the manufacturer is allowed to transfer ownership of meters to distributors. The commenter suggested that revising the proposed regulation to allow transfer of ownership would increase competition in the marketplace and put an end to regulations that the commenter perceived as favoring manufacturers who operate a vertically integrated operation over those who use third parties to distribute meters. The commenter suggested that this change would make the regulation by the Postal Service of the security of postage meters in the custody of distributors and other third parties the same whether or not the third party owns, repairs, or distributes the meters.
Any control the Postal Service exercises over a person or concern that controls, distributes, maintains, replaces, repairs, or disposes of meters is currently exercised through the manufacturer. The Postal Service is seeking to standardize and strengthen the level of manufacturer control. The Postal Service does not now allow the transfer of ownership of meters to a third party. Any entity wanting to own meters now must qualify under 39 CFR part 501 to become an approved manufacturer. The entity must be capable of performing all functions required by part 501, including performance of inspections and identifying meters that are defective or tampered. The entity must also be capable of protecting and controlling internal and security components within the scope of Sec. 501.28, as amended by this rule. No substantive change is made to the proposed rule in response to this comment.
2. One commenter requested that the Postal Service provide standard written terms and conditions for manufacturers to include in all future thirdparty distributor agreements.
Given the variety of relationships that could exist between a manufacturer and a third party that controls, distributes, maintains, replaces, repairs, or disposes of meters, the Postal Service does not believe it is feasible to provide standard written terms and conditions for manufacturers to include in a thirdparty agreement. All third parties must adhere to applicable regulations, just as the manufacturer does. The applicable regulations include title 39, Code of Federal Regulations, part 501, Authorization to Manufacture and Distribute Postage Meters, and Domestic Mail Manual, Issue 57, especially section P030, Postage Meters (Postage Evidencing Systems). Manufacturers could consider requiring adherence to these regulations, and any others that may be applicable, in any thirdparty agreement. No change is made to the proposed rule in response to this comment.
3. One manufacturer with existing thirdparty relationships to distribute, replace, and dispose of meters suggested in its comment that such existing relationships should be grandfathered and exempt from the new regulations.
The manufacturer is responsible for controlling any third party in accordance with all applicable regulations. Postage Technology Management has the authority to review all existing relationships and the manufacturer's internal controls to ensure compliance. In this final rule, the Postal Service is clarifying the proposed rule in response to this comment.
4. One commenter asked that changes in field distribution relationships not require preapproval by the Postal Service. The time required to obtain such approval would unfairly burden the company and hinder its competitiveness. The commenter suggested that new third party relationships, with the exception of new field sales relationships, should be presented for approval.
The Postal Service will review and approve thirdparty relationships only when the relationship has the potential to affect meter security or the security of Postal Service revenue. The Postal Service will not review those relationships commonly known as field sales or dealer relationships unless there is a particular security concern with the dealer or its operations. However, manufacturers must exercise control over their dealers in accordance with Postal Service regulations. In this final rule, the Postal Service is clarifying the proposed rule with respect to relationships with dealers and field sales representatives.
List of Subjects in 39 CFR Part 501
Administrative practice and procedure, Postal Service. The Amendment
For the reasons set out in this document, the Postal Service is amending 39 CFR part 501 as follows:
PART 501AUTHORIZATION TO MANUFACTURE AND DISTRIBUTE POSTAGE METERS
1. The authority citation for part 501 continues to read as follows:
Authority: 5 U.S.C. 552(a); 39 U.S.C. 101, 401, 403, 404, 410,
2601, 2605; Inspector General Act of 1978, as amended (Pub. L. 95 452, as amended); 5 U.S.C. App. 3.
2. Revise Sec. 501.22 to read as follows:
Sec. 501.22 Inventory control.
(a) An authorized manufacturer must maintain sufficient facilities
for and records of the distribution, control, storage, maintenance,
repair, replacement, and destruction or disposal of all meters and
their components to enable accurate accounting thereof throughout the
entire meter life cycle. Recordkeeping is required for all meters
including newly produced meters, active leased meters, inactive meters,
unleased meters, and lost or stolen meters. All such facilities and
records are subject to inspection by Postal Service representatives.
(b) If the manufacturer uses a third party to perform functions
that may affect meter security, including, but not limited to meter
repair, maintenance, and disposal, the manager of Postage Technology
Management, Postal Service Headquarters, must review in advance all
aspects of the relationship, as they relate to the custody and control
of meters, and must specifically authorize in writing the arrangement between the parties.
(1) Postal Service authorization of a thirdparty relationship for
a given function does not extend to any other function. Extension of
the thirdparty relationship to another function must be implemented and approved as if it were a new relationship.
(2) No thirdparty relationship shall compromise the security of
the meter, or of any of its components, including, but not limited to,
the hardware, software, communications, and security components, or of any system with
[[Page 2699]]
which it interfaces, including, but not limited to, the resetting
system, reporting systems, and Postal Service support systems. The
functions of the third party with respect to a meter, its components,
and the systems with which it interfaces are subject to the same scrutiny as the equivalent functions of the manufacturer.
(3) Any authorized third party must keep adequate facilities for
and records of meters and their components in accordance with paragraph
(a) of this section. All such facilities and records are subject to
inspection by Postal Service representatives, insofar as they are used
to distribute, control, store, maintain, repair, replace, destroy, or dispose of meters.
(4) The manufacturer must ensure that any party acting in its
behalf in any of the functions described in paragraph (a) of this
section maintains adequate facilities, records, and procedures for the
security of the meters. Deficiencies in the operations of a third party
relating to the custody and control of postage meters, unless corrected
in a timely manner, can place at risk a manufacturer's approval to manufacture and/or distribute postage meters.
(5) The Postal Service reserves the right to review all aspects of
any thirdparty relationship when it becomes aware that the
relationship poses a threat to meter security under paragraph (b)(2) of
this section, whether or not that relationship required authorization under paragraph (b) of this section.
3. Revise Sec. 501.28 to read as follows:
Sec. 501.28 Protection and control of internal and security components.
Any physical or electronic access to the internal components of a
meter, as well as any access to software or security parameters, must
be conducted within an approved factory or meter repair facility under
the manufacturer's direct control and active supervision. The Postal
Service must have checked a meter out of service before any component,
software, or security parameter is accessed or modified in any way, or
internal repairs are undertaken. This does not apply to Postal Service
approved user, field, or Postal Service access to a specific internal
component or software. To prevent unauthorized use, the manufacturer or
any third party acting on its behalf must keep secure any equipment or
other component that can be used to open or access the internal, electronic, or secure components of a meter.
Stanley F. Mires,
Chief Counsel, Legislative.
[FR Doc. 031156 Filed 11703; 8:45 am]
BILLING CODE 771012P
FOR FURTHER INFORMATION CONTACT
Wayne Wilkerson, manager of Postage Technology Management, at 7032923691, or by fax at 7032924050. [[Page 2698]]