Browse: Departments   Dates   Agencies  

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

CFR Citation: 14 CFR Part 23

Docket ID: [Docket No. CE194, Special Condition 23-134-SC]

NOTICE: RULES

ACTION: Airworthiness standards:

DOCUMENT ACTION: Final special conditions; request for comments.

SUBJECT CATEGORY: Special Conditions; Cirrus Design Corporation SR22; Protection of Systems for High Intensity Radiated Fields (HIRF)

DATES: The effective date of these special conditions is January 24, 2003. Comments must be received on or before March 6, 2003.

DOCUMENT SUMMARY: These special conditions are issued to Cirrus Design Corporation, 4515 Taylor Circle, Duluth, Minnesota 55811, for a Type Design Change for the
[[Page 5539]]
Cirrus Design Corporation Model SR22 airplane. This airplane will have novel and unusual design features when compared to the state of technology envisaged in the applicable airworthiness standards. These novel and unusual design features include the installation of electronic flight instrument system (EFIS) displays Model 70000006 XXX( ) manufactured by Avidyne Corporation for which the applicable regulations do not contain adequate or appropriate airworthiness standards for the protection of these systems from the effects of high intensity radiated fields (HIRF). These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to the airworthiness standards applicable to these airplanes.

SUMMARY: Special conditions—; Cirrus Design Corp. Model SR22 airplanes,

SUPPLEMENTAL INFORMATION

The FAA has determined that notice and opportunity for prior public comment hereon are impracticable because these procedures would significantly delay issuance of the design approval and thus delivery of the affected aircraft. In addition, the substance of these special conditions has been subject to the public comment process in several prior instances with no substantive comments received. The FAA, therefore, finds that good cause exists for making these special conditions effective upon issuance.

Comments Invited

Interested persons are invited to submit such written data, views, or arguments as they may desire. Communications should identify the regulatory docket or notice number and be submitted in duplicate to the address specified above. All communications received on or before the closing date for comments will be considered by the Administrator. The special conditions may be changed in light of the comments received. All comments received will be available in the Rules Docket for examination by interested persons, both before and after the closing date for comments. A report summarizing each substantive public contact with FAA personnel concerning this rulemaking will be filed in the docket. Commenters wishing the FAA to acknowledge receipt of their comments submitted in response to this notice must include a self addressed, stamped postcard on which the following statement is made: ``Comments to Docket No. CE194.'' The postcard will be date stamped and returned to the commenter.

Background

On July 8, 2002, Cirrus Design Corporation , 4515 Taylor Circle, Duluth, Minnesota 55811, made an application to the FAA for a Type Design Change for the Cirrus Design Corporation Model SR22 airplane. The Model SR22 is currently approved under TC No. A00009CH. The proposed modification incorporates a novel or unusual design feature, such as digital avionics consisting of an EFIS, that is vulnerable to HIRF external to the airplane.

Type Certification Basis

Under the provisions of 14 CFR part 21, Sec. 21.101, Cirrus Design Corporation must show that the Cirrus Design Corporation Model SR22 aircraft meets the following provisions, or the applicable regulations in effect on the date of application for the change to the Cirrus Design Corporation Model SR22: Part 23 of the Federal Aviation Regulations effective February 1, 1965, as amended by 231 through 23 53, except as follows: Sec. 23.301 through Amendment 47; Sec. Sec. 23.855, 23.1326, 23.1359, not applicable. 14 CFR 36 dated December 1, 1969, as amended by current amendment as of the date of type Certification.

Equivalent Levels of Safety finding (ACE965) made per the provisions of 14 CFR part 23, Sec. 23.221; Refer to FAA ELOS letter dated June 10, 1998 for models SR20, SR22. Equivalent Levels Of Safety finding (ACE0009) made per the provisions of 14 CFR part 23, Sec. Sec. 23.1143(g) and 23.1147(b); Refer to FAA ELOS letter dated September 11, 2000 for model SR22.

Special Condition (23ACE88) for ballistic parachute; Refer to FAA letter November 25, 1997 for models SR20, SR22.

Discussion

If the Administrator finds that the applicable airworthiness standards do not contain adequate or appropriate safety standards because of novel or unusual design features of an airplane, special conditions are prescribed under the provisions of Sec. 21.16.

Special conditions, as appropriate, as defined in Sec. 11.19, are issued in accordance with Sec. 11.38 after public notice and become part of the type certification basis in accordance with Sec. 21.101 (b)(2).

Special conditions are initially applicable to the model for which they are issued. Should the applicant apply for a supplemental type certificate to modify any other model already included on the same type certificate to incorporate the same novel or unusual design feature, the special conditions would also apply to the other model under the provisions of Sec. 21.101.

Novel or Unusual Design Features

Cirrus Design Corporation plans to incorporate certain novel and unusual design features into an airplane for which the airworthiness standards do not contain adequate or appropriate safety standards for protection from the effects of HIRF. These features include EFIS, which are susceptible to the HIRF environment, that were not envisaged by the existing regulations for this type of airplane.
Protection of Systems From High Intensity Radiated Fields (HIRF)

Recent advances in technology have given rise to the application in aircraft designs of advanced electrical and electronic systems that perform functions required for continued safe flight and landing. Due to the use of sensitive solid state advanced components in analog and digital electronics circuits, these advanced systems are readily responsive to the transient effects of induced electrical current and voltage caused by the HIRF. The HIRF can degrade electronic systems performance by damaging components or upsetting system functions.

Furthermore, the HIRF environment has undergone a transformation that was not foreseen when the current requirements were developed. Higher energy levels are radiated from transmitters that are used for radar, radio, and television. Also, the number of transmitters has increased significantly. There is also uncertainty concerning the effectiveness of airframe
[[Page 5540]]
shielding for HIRF. Furthermore, coupling to cockpitinstalled equipment through the cockpit window apertures is undefined.

The combined effect of the technological advances in airplane design and the changing environment has resulted in an increased level of vulnerability of electrical and electronic systems required for the continued safe flight and landing of the airplane. Effective measures against the effects of exposure to HIRF must be provided by the design and installation of these systems. The accepted maximum energy levels in which civilian airplane system installations must be capable of operating safely are based on surveys and analysis of existing radio frequency emitters. These special conditions require that the airplane be evaluated under these energy levels for the protection of the electronic system and its associated wiring harness. These external threat levels, which are lower than previous required values, are believed to represent the worst case to which an airplane would be exposed in the operating environment.

These special conditions require qualification of systems that perform critical functions, as installed in aircraft, to the defined HIRF environment in paragraph 1 or, as an option to a fixed value using laboratory tests, in paragraph 2, as follows:
(1) The applicant may demonstrate that the operation and operational capability of the installed electrical and electronic systems that perform critical functions are not adversely affected when the aircraft is exposed to the HIRF environment defined below: Field strength (volts per meter) Frequency
Peak Average 10 kHz100 kHz................................ 50 50 100 kHz500 kHz............................... 50 50 500 kHz2 MHz................................. 50 50 2 MHz30 MHz.................................. 100 100 30 MHz70 MHz................................. 50 50 70 MHz100 MHz................................ 50 50 100 MHz200 MHz............................... 100 100 200 MHz400 MHz............................... 100 100 400 MHz 700 MHz.............................. 700 50 700 MHz1 GHz................................. 700 100 1 GHz2 GHz................................... 2000 200 2 GHz4 GHz................................... 3000 200 4 GHz6 GHz................................... 3000 200 6 GHz8 GHz................................... 1000 200 8 GHz12 GHz.................................. 3000 300 12 GHz18 GHz................................. 2000 200 18 GHz40 GHz................................. 600 200 Note.The field strengths are expressed in terms of peak rootmean square (rms) values.
or,
(2) The applicant may demonstrate by a system test and analysis that the electrical and electronic systems that perform critical functions can withstand a minimum threat of 100 volts per meter, electrical field strength, from 10 kHz to 18 GHz. When using this test to show compliance with the HIRF requirements, no credit is given for signal attenuation due to installation.

A preliminary hazard analysis must be performed by the applicant, for approval by the FAA, to identify either electrical or electronic systems that perform critical functions. The term ``critical'' means those functions whose failure would contribute to, or cause, a failure condition that would prevent the continued safe flight and landing of the airplane. The systems identified by the hazard analysis that perform critical functions are candidates for the application of HIRF requirements. A system may perform both critical and noncritical functions. Primary electronic flight display systems, and their associated components, perform critical functions such as attitude, altitude, and airspeed indication. The HIRF requirements apply only to critical functions.

Compliance with HIRF requirements may be demonstrated by tests, analysis, models, similarity with existing systems, or any combination of these. Service experience alone is not acceptable since normal flight operations may not include an exposure to the HIRF environment. Reliance on a system with similar design features for redundancy as a means of protection against the effects of external HIRF is generally insufficient since all elements of a redundant system are likely to be exposed to the fields concurrently.

Applicability

As discussed above, these special conditions are applicable to Cirrus Design Corporation Model SR22 airplane. Should Cirrus Design Corporation apply at a later date for a type design change to modify any other model on the same type certificate to incorporate the same novel or unusual design feature, the special conditions would apply to that model as well under the provisions of Sec. 21.101.

Conclusion

This action affects only certain novel or unusual design features on one model of airplane. It is not a rule of general applicability and affects only the applicant who applied to the FAA for approval of these features on the airplane.

The substance of these special conditions has been subjected to the notice and comment period in several prior instances and has been derived without substantive change from those previously issued. It is unlikely that prior public comment would result in a significant change from the substance contained herein. For this reason, and because a delay would significantly affect the certification of the airplane, which is imminent, the FAA has determined that prior public notice and comment are unnecessary and impracticable, and good cause exists for adopting these special conditions upon issuance. The FAA is requesting comments to allow interested persons to submit views that may not have been submitted in response to the prior
[[Page 5541]]
opportunities for comment described above.
List of Subjects in 14 CFR Part 23

Aircraft, Aviation safety, Signs and symbols.

Citation

The authority citation for these special conditions is as follows:

Authority: 49 U.S.C. 106(g), 40113 and 44701; 14 CFR 21.16 and 21.101; and 14 CFR 11.38 and 11.19.

The Special Conditions

Accordingly, pursuant to the authority delegated to me by the Administrator, the following special conditions are issued as part of the type certification basis for Cirrus Design Corporation SR22 airplane modified by Cirrus Design Corporation to add an EFIS.

1. Protection of Electrical and Electronic Systems from High Intensity Radiated Fields (HIRF). Each system that performs critical functions must be designed and installed to ensure that the operations, and operational capabilities of these systems to perform critical functions, are not adversely affected when the airplane is exposed to high intensity radiated electromagnetic fields external to the airplane.

2. For the purpose of these special conditions, the following definition applies:

Critical Functions: Functions whose failure would contribute to, or cause, a failure condition that would prevent the continued safe flight and landing of the airplane.

Issued in Kansas City, Missouri, on January 24, 2003. Michael Gallagher,
Manager, Small Airplane Directorate, Aircraft Certification Service. [FR Doc. 032524 Filed 2303; 8:45 am]
BILLING CODE 491013P

FOR FURTHER INFORMATION CONTACT Wes Ryan, Aerospace Engineer, Standards Office (ACE110), Small Airplane Directorate, Aircraft Certification Service, Federal Aviation Administration, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone (816) 3294127.