Browse: Departments Dates Agencies
DE ID: [DE 070--1043b; FRL-7639-5]
SUBJECT CATEGORY: Approval and Promulgation of Air Quality Implementation Plans; Delaware; Amendments to Regulation 24, Section 10--Aerospace Coatings
DOCUMENT SUMMARY: EPA proposes to approve a revision to the State of Delaware
State Implementation Plan (SIP). The revision corrects the definition
of the term ``FireResistant (interior) Coating'' in Delaware's
regulation to control volatile organic compound (VOC) emissions from
aerospace coatings operations. The correction to the definition makes
it consistent with EPA's Control Technique Guideline (CTG) for this VOC
source category. In the Final Rules section of this Federal Register,
EPA is approving the State's SIP submittal as a direct final rule without prior proposal because the Agency views this as a
noncontroversial submittal and anticipates no adverse comments. A
detailed rationale for the approval is set forth in the direct final
rule. If no adverse comments are received in response to this action,
no further activity is contemplated. If EPA receives adverse comments,
the direct final rule will be withdrawn and all public comments
received will be addressed in a subsequent final rule based on this
proposed rule. EPA will not institute a second comment period. Any
parties interested in commenting on this action should do so at this
time.
SUMMARY: Delaware,
You may submit comments either electronically or by mail. To ensure proper receipt by EPA, identify the appropriate rulemaking identification number DE 0701043 in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments.
1. Electronically. If you submit an electronic comment as prescribed below, EPA recommends that you include your name, mailing address, and an email address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.
i. Email. Comments may be sent by electronic mail (email) to
morris.makeba@epa.gov, attention MD145/`543104. EPA's email system is
not an ``anonymous access'' system. If you send an email comment
directly without going through Regulations.gov, EPA's email system
automatically captures your email address. Email addresses that are
automatically captured by EPA's email system are included as part of the comment that is placed in the official public docket.
ii. Regulations.gov. Your use of Regulation.gov is an alternative
method of submitting electronic comments to EPA. Go directly to http://www.regulations.gov , then select ``Environmental Protection Agency'' at
the top of the page and use the ``go'' button. The list of current EPA
actions available for comment will be listed. Please follow the online
instructions for submitting comments. The system is an ``anonymous
access'' system, which means EPA will not know your identity, email
address, or other contact information unless you provide it in the body of your comment.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in the ADDRESSES section of this document. These electronic submissions will be accepted in WordPerfect, Word or ASCII file format. Avoid the use of special characters and any form of encryption.
2. By Mail. Written comments should be addressed to the EPA Regional office listed in the ADDRESSES section of this document.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing at the EPA Regional Office,
as EPA receives them and without change, unless the comment contains
copyrighted material, confidential business information (CBI), or other
information whose disclosure is restricted by statute. When EPA
identifies a comment containing copyrighted material, EPA will provide
a reference to that material in the version of the comment that is
placed in the official public rulemaking file. The entire printed comment, including the
[[Page 13794]]
copyrighted material, will be available at the Regional Office for public inspection.
Do not submit information that you consider to be CBI electronically to EPA. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR Part 2.
In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the official public regional rulemaking file. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public file and available for public inspection without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person identified in the FOR FURTHER INFORMATION CONTACT section.
You may find the following suggestions helpful for preparing your comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide any technical information and/or data you used that support your views.
4. If you estimate potential burden or costs, explain how you arrived at your estimate.
5. Provide specific examples to illustrate your concerns.
6. Offer alternatives.
7. Make sure to submit your comments by the comment period deadline identified.
8. To ensure proper receipt by EPA, identify the appropriate
regional file/rulemaking identification number in the subject line on
the first page of your response. It would also be helpful if you
provided the name, date, and Federal Register citation related to your comments.
Dated: March 16, 2004.
Thomas C. Voltaggio,
Acting Regional Administrator, Region III.
[FR Doc. 046563 Filed 32304; 8:45 am]
BILLING CODE 656050P
FOR FURTHER INFORMATION CONTACT Janice Lewis, (215) 814-2185, or by e- mail at lewis.janice@epa.gov.
14 CFR Part 39 40 CFR Part 52 14 CFR Part 71 33 CFR Part 165 50 CFR Part 679 47 CFR Part 73 26 CFR Part 1 40 CFR Part 180 33 CFR Part 117 50 CFR Part 17 44 CFR Part 67 50 CFR Part 648 14 CFR Part 97 33 CFR Part 100 40 CFR Part 63 50 CFR Part 622 44 CFR Part 65 50 CFR Part 660 26 CFR Part 301 39 CFR Part 111 40 CFR Part 300 6 CFR Part 5 40 CFR Part 271 47 CFR Part 64 40 CFR Parts 52 and 81 50 CFR Part 665 44 CFR Part 64 10 CFR Part 50 49 CFR Part 571 47 CFR Part 76