Browse: Departments Dates Agencies
Docket ID: [Docket No. 050801214-5283-02; I.D. 072105D]
RIN ID: RIN 0648-AQ91
SUBJECT CATEGORY: Fisheries Off West Coast States and in the Western Pacific; Western Pacific Pelagic Fisheries; Sea Turtle Mitigation Measures
DOCUMENT SUMMARY: NMFS issues a final rule to reduce and mitigate interactions between sea turtles and fisheries managed under the Fishery Management Plan for the Pelagic Fisheries of the Western Pacific Region (Pelagics FMP). This rule includes requirements for attending protected species workshops, for handling, resuscitating, and releasing sea turtles that are hooked or entangled in fishing gear, and for fishing gear configuration. This action is being taken in part to comply with the terms and conditions of a 2004 Biological Opinion on impacts on sea turtles by fisheries managed under the Pelagics FMP.
SUMMARY: West Coast States and Western Pacific fisheries—; Western Pacific pelagic,
This Federal Register document is also accessible via the Internet at: http://www.archives.gov/federalregister/publications.
On August 15, 2005, NMFS published in the Federal Register a proposed rule (70 FR 47777) that would require vessel owners and operators to attend protected species workshops, to handle, resuscitate, and release sea turtles that are hooked or entangled in fishing gear, and to modify fishing gear configuration. This action is being taken in part to comply with the terms and conditions of a 2004 Biological Opinion resulting from a section 7 consultation under the Endangered Species Act (ESA) that analyzed the impacts on sea turtles caused by fisheries managed under the Pelagics FMP.
In a Biological Opinion issued on February 23, 2004, NMFS concluded that the fisheries managed under the Pelagics FMP were not likely to jeopardize the continued existence of sea turtles or other species listed as threatened or endangered under the ESA.. Among other things, the terms and conditions of the 2004 Biological Opinion require the following: (1) owners and operators of vessels registered for use under longline general permits to attend protected species workshops annually, (2) owners and operators of vessels registered for use under longline general permits to carry and use dip nets, line clippers, and bolt cutters, and follow handling, resuscitation, and release requirements for incidentally hooked or entangled sea turtles, and (3) operators of nonlongline vessels using hooks to target pelagic management unit species to follow sea turtle handling, resuscitation, and release requirements, as well as to remove the maximum amount of the gear possible from incidentally hooked or entangled sea turtles.
In addition to recommending the above three measures, the Western Pacific Fishery Management Council (WPFMC) also recommended that NMFS include a fourth measure in this rule to extend to all longline vessels managed under the Pelagics FMP that may shallowset north of the Equator the conservation benefits derived from the use of circle hooks, mackereltype bait, and dehookers. The fourth measure also removes incentives for owners of Hawaiibased longline vessels to shed their permits in favor of general permits for the purpose of avoiding the requirement to use circle hooks, mackerel bait, etc., when shallow setting north of the Equator.
Additional background on this final rule is found in the preamble to the proposed rule (70 FR 47777, published August 15, 2005) and is not repeated here.
NMFS received comments on the proposed rule (70 FR 47777, published August 15, 2005) from one interested person. NMFS responds to the comment, as follows:
Comment: The commenter supported the requirement for vessel owners and operators to attend protected species workshops, and the requirement for the owners and operators to be recertified regularly so that their knowledge of protected species stays current.
Response: NMFS appreciates the support for the protected species workshop requirement, and notes that owners and operators must attend the workshop annually to obtain updated information about protected resources.
In Sec. 660.32, the regulatory text in paragraph (a)(3) is corrected to clarify that vessels affected by this paragraph are those with freeboards of 3 ft (0.91 m) or less. The proposed rule had accurately referred in the preamble and in the title of the regulatory text to vessels with freeboards of 3 ft (0.91 m) or less, but had inadvertently referred in the regulatory text described the paragraph as applying to vessels with freeboards ``greater than'' 3 ft (0.91 m). NMFS received no public comment on this inadvertency.
The Administrator, Pacific Islands Region, NMFS, determined that this rule
[[Page 69283]]
is necessary for the conservation and management of the pelagic
fisheries on the western Pacific region, and that it is consistent with the MagnusonStevens Act and other applicable laws.
This final rule has been determined to be not significant for purposes of Executive Order 12866.
The potential economic impacts of this final rule on small entities were identified in an Initial Regulatory Flexibility Analysis (IRFA) and summarized in a Federal Register notice published August 15, 2005 (70 FR 47777).. NMFS subsequently prepared a Final Regulatory Flexibility Analysis (FRFA).. A description of why the action is being considered, the objectives and legal basis for the action, and a description of the action, may be found at the beginning of this section. There are no recordkeeping or reporting requirements in this rule. No public comment was made on the IRFA.
Section 212 of the Small Business Regulatory Enforcement Fairness Act of 1996 states that for each rule or group of related rules for which an agency is required to prepare a FRFA, the agency shall publish one or more guides to assist small entities in complying with the rule, and shall designate such publications as ``small entity compliance guides''. The agency shall explain the actions a small entity is required to take to comply with a rule or group of rules. As part of this rule making process, a small entity compliance guide (compliance guide) was prepared.. Copies of this final rule and the compliance guide will be sent to all holders of permits issued for the western Pacific pelagic fisheries. The compliance guide will be available at the following web site http://swr.nmfs.noaa.gov/pir. Copies can also be obtained from the PIR (see ADDRESSES).
This rule does not duplicate, overlap, or conflict with any relevant Federal rules. All affected vessels are considered to be small entities. Therefore, there are no economic impacts resulting from disproportionality between large and small vessels. A summary of the analysis follows.
Most fishing vessels operating in the western Pacific region under the Pelagics FMP are owneroperated, with few individuals holding permits for more than one vessel. There are estimated to be between 9,000 and 16,000 of these fishing operations (these estimated totals may include vessels that do not operate in EEZ waters), all of which are believed to be small businesses, i.e., according to Small Business Administration guidelines, they have gross revenues of less than $3.5 million annually.
Previously, all operators of longline vessels managed under the Pelagics FMP were required to attend protected species workshops. This requirement was removed by a U.S. District Court on April 1, 2004 (D.D.C., Civ. No. 010765). Requiring both the owners and operators of vessels registered for use under longline general permits to annually attend protected species workshops will have a minimal cost for those who reside in Hawaii or American Samoa, where the training workshops are conducted. Some 15 percent of the vessels that fish in American Samoa and Hawaii under longline permits, however, have owners that reside outside of those two areas. A substantial travel cost to attend the workshops would be incurred by those people. NMFS is currently accommodating the owners and operators of Hawaiibased vessels that live outside Hawaii by providing interim protected species training via computer disk, mailed to the owner or operator.. This type of remote training and certification relieves potential travel costs, and may be further developed and implemented for other owners and operators who are not able to attend the workshops in person.
Owners and operators of the vessels that are registered for use under longline general permits were previously required to carry and use dipnets, longhandled line clippers, and bolt cutters, so most vessels with longline general permits already have this gear.. However, these measures were also removed by the Federal Court in the case cited above. If the owners need to reequip their vessels, the costs are not expected to exceed $100 per vessel. The WPFMC recommended that small longline vessels such as alias, i.e., American Samoabased catamaran longline vessels generally less than 40 ft (12.2 m) in length, not be required to carry a dip net or longhandled line clippers because, due to the low freeboards on these boats, operators can simply retrieve and release the turtle from the side of the vessel without risk of additional injury to the animal.
The WPFMC's recommendation to require vessels registered under a longline general permit to use size 18/0 or larger circle hooks with a 10[deg] offset, mackereltype bait, and dehookers when shallowsetting north of the Equator would incur the following costs: Reequipping longlines with 18/0 circle hooks plus swivels would cost approximately $1.50/hook, and a large (longer than 75 ft or 22.8 m) longline vessel generally deploys 2,0002,500 hooks/set, so the cost per vessel of that size would be $3,000 to $3,750. American Samoabased longline vessels already use mackereltype bait, i.e., sardine or saury (sanma), so there would be no additional cost for the bait requirement for these vessels. Obtaining approved dehookers and associated equipment would cost about $500 per vessel. The WPFMC recommended that small longline vessels with freeboards of less than or equal to three feet not be required to carry longhandled dehookers because operators can more effectively and safely use shorthandled dehookers to release sea turtles without risk of additional injury to the animal.
Under this rule, the total cost to equip a vessel registered for use with a longline general permit to shallowset north of the Equator is estimated to be between $3,500 and $4,250. An ongoing additional annual replacement cost of $0.20 per hook would also be required as circle hooks are slightly more expensive than typical ``J'' hooks.
The requirement for operators of all vessels that use hooks to target PMUS to follow sea turtle handling, resuscitation, and release requirements, including removing trailing gear, is not expected to exact any economic burden on these fishery participants because no gear requirements are being proposed for nonlongline vessels, and interactions are rare.
For each of the four measures recommended by the WPFMC, three alternatives were developed, so altogether, 12 alternatives were considered. The alternatives considered for the measure regarding protected species workshop attendance by owners and operators of vessels registered for use under longline general permits were: (1) no action maintaining the status quo; (2) requiring annual attendance by only vessel operators; and (3) requiring annual attendance by both vessel owners and operators.
The alternatives considered for the measure regarding sea turtle
mitigation gear (i.e., dip nets, line clippers, and bolt cutters) and
handling, resuscitation, and release requirements were: (1) no action
maintaining the status quo; (2) requiring owners and operators of
vessels registered under a longline general permit to carry and use dip
nets, line clippers, and bolt cutters, as well as follow handling,
resuscitation, and release requirements for hooked or entangled sea
turtles (vessels with 3 ft (0.91 m) of freeboard or less would be
exempt from carrying dip nets or longhandled line clippers); and (3)
requiring owners and operators of vessels registered under a longline general permit to carry and use dip nets, line
[[Page 69284]]
clippers, and bolt cutters, as well as follow handling, resuscitation,
and release requirements for hooked or entangled sea turtles, with no
exemptions for longline vessels with freeboards less than three ft (0.91 m).
The alternatives for the measure regarding vessels that use hooks to target pelagic management unit species were: (1) no action maintaining the status quo; (2) requiring vessel owners and operators to follow sea turtle handling, resuscitation, and release requirements, including the removal of trailing gear from a hooked or entangled sea turtle when fishing in the EEZ of the western Pacific region; and (3) requiring vessel owners and operators to follow sea turtle handling, resuscitation, and release requirements, including the removal of trailing gear, wherever they fish.
The alternatives for the measure regarding gear and bait requirements for owners and operators of vessels registered for use under a longline general permit that may shallowset north of the Equator were: (1) no action maintaining the status quo; (2) requiring owners and operators to use 18/0 or larger circle hooks with 10[deg] offset, mackereltype bait, and dehookers when shallowsetting north of the Equator; and (3) prohibiting shallowsetting north of the Equator by vessels registered under longline general permits.
The following alternative was preferred because it best complied with the terms and conditions of the 2004 Biological Opinion: (1) requiring annual workshop attendance by both owners and operators; (2) requiring owners and operators of vessels registered for use under a longline general permit to carry and use dip nets, line clippers, and bolt cutters, as well as to follow handling, resuscitation, and release requirements for hooked or entangled sea turtles (vessels with 3 ft (0.91 m) of freeboard or less would be exempted from carrying dip nets or longhandled line clippers); (3) requiring longline vessel owners and operators to follow sea turtle handling, resuscitation, and release requirements, including the removal of trailing gear wherever they fish; and (4) requiring longline vessels owners and operators to use 18/0 or larger circle hooks with 10F[deg] offset, mackereltype bait, and dehookers when shallowsetting north of the Equator (vessels with 3 ft (0.91 m) of freeboard or less would not be required to carry long handled dehookers).
The inclusion of turtle handling requirements contained in 50 CFR 660.32 (c) and (d) (which largely reflects those in 50 CFR 223.206) is necessary because 50 CFR 223.206 only applies to threatened species of sea turtles. This rule extends those handling requirements to interactions between Pelagics FMP fishing vessels and all species of sea turtles.
Administrative practice and procedure, American Samoa, Fisheries,
Fishing, Guam, Hawaiian Natives, Indians, Northern Mariana Islands, Reporting and recordkeeping requirements.
Dated: November 7, 2005.
James W. Balsiger,
Acting Deputy Assistant Administrator for Regulatory Programs, National Marine Fisheries Service.
For the reasons set out in the preamble, 50 CFR part 660 is amended as follows:
PART 660FISHERIES OFF WEST COAST STATES AND IN THE WESTERN PACIFIC
1. The authority citation for part 660 continues to read as follows:
Authority: 16 U.S.C. 1801 et seq.
2. In Sec. 660.22, paragraphs (ff), (gg), (ii), (ll), (nn), and (oo) are revised to read as follows:
Sec. 660.22 Prohibitions.
* * * * *
(ff) Own or operate a vessel registered for use under any longline
permit issued under Sec. 660.21 while engaged in longline fishing for
Pelagic Management Unit Species and fail to be certified for completion
of a NMFS protected species workshop, in violation of Sec. 660.34(a).
(gg) Own or operate a vessel registered for use under any longline
permit issued under Sec. 660.21 while engaged in longline fishing for
Pelagic Management Unit Species without having on board a valid
protected species workshop certificate issued by NMFS or a legible copy thereof, in violation of Sec. 660.34(d).
* * * * *
(ii) Fail to carry, or fail to use, a line clipper, dip net, or
dehooker on a vessel registered for use under any longline permit issued under Sec. 660.21, in violation of Sec. 660.32.
* * * * *
(ll) When operating a vessel registered for use under any longline
permit issued under Sec. 660.21 or operating a vessel using hooks to
target Pelagic Management Unit Species while fishing under the Pelagics
FMP, fail to comply with the sea turtle handling requirements, in violation of Sec. 660.32(b).
* * * * *
(nn) Engage in shallowsetting from a vessel registered for use
under any longline permit issued under Sec. 660.21 north of the
Equator (0[deg] lat.) with hooks other than offset circle hooks sized
18/0 or larger, with a 10[deg] offset, in violation of Sec. 660.33(f).
(oo) Engage in shallowsetting from a vessel registered for use
under any longline permit issued under Sec. 660.21 north of the
Equator (0[deg] lat.) with bait other than mackereltype bait, in violation of Sec. 660.33(g).
* * * * *
3. In Sec. 660.32, paragraphs (c) and (d) are removed; paragraphs
(a)(2) through (a)(4) are redesignated as paragraphs (a)(4) through
(a)(6); paragraphs (a)(1), (b), and newly redesignated paragraph (a)(4)
are revised; and paragraphs (a) introductory text, (a)(2), and (a)(3) are added to read as follows:
Sec. 660.32 Sea turtle mitigation measures.
(a) Possession and use of required mitigation gear. The gear
required in paragraph (a) of this section must be used according to the
sea turtle handling requirements set forth in paragraph (b) of this section.
(1) Hawaii longline limited access permits. Any owner or operator
of a vessel registered for use under a Hawaii longline limited access
permit must carry aboard the vessel line clippers meeting the minimum
design standards specified in paragraph (a)(5) of this section, dip
nets meeting the minimum design standards specified in paragraph (a)(6)
of this section, and dehookers meeting the minimum design and
performance standards specified in paragraph (a)(4) of this section.
(2) Other longline vessels with freeboards of more than 3 ft
(0.91m). Any owner or operator of a longline vessel with a permit
issued under Sec. 660.21 other than a Hawaii limited access longline
permit and that has a freeboard of more than 3 ft (0.91 m) must carry
aboard the vessel line clippers meeting the minimum design standards
specified in paragraph (a)(5) of this section, dip nets meeting the
minimum design standards specified in paragraph (a)(6) of this section,
and dehookers meeting ths minimum design and performance standards specified in paragraph (a)(7) of this section.
(3) Other longline vessels with freeboards of 3 ft (0.91 m) or
less. Any owner or operator of a longline vessel with a permit issued
under Sec. 660.21 other than a Hawaii limited access longline permit
and that has a freeboard of 3 ft (0.91 m) or less must carry aboard
their vessels line clippers capable of cutting the vessels fishing line or leader
[[Page 69285]]
within approximately 1 ft (0.3 m) of the eye of an embedded hook, as
well as wire or bolt cutters capable of cutting through the vessel's hooks.
(4) Handline, troll, poleandline, and other vessels using hooks
other than longline vessels. Any owner or operator of a vessel fishing
under the Pelagics FMP with hooks other than longline gear are not
required to carry specific mitigation gear, but must comply with the
handling requirements set forth in paragraph (b) of this section. * * * * *
(b) Handling requirements. If a sea turtle is observed to be hooked
or entangled in fishing gear from any vessel fishing under the Pelagics
FMP, vessel owners and operators must use the required mitigation gear
set forth in paragraph (a) of this section to comply with these
handling requirements. Any hooked or entangled sea turtle must be
handled in a manner to minimize injury and promote survival.
(1) Sea turtles that cannot be brought aboard. In instances where a
sea turtle is too large to be brought aboard or the sea turtle cannot
be brought aboard without causing further injury to the sea turtle, the
vessel owner or operator must disentangle and remove the gear, or cut
the line as close as possible to the hook or entanglement, to remove the maximum amount of the gear from the sea turtle.
(2) Sea turtles that can be brought aboard. In instances where a
sea turtle is not too large to be brought aboard, or the sea turtle can
be brought aboard without causing further injury to the turtle, the vessel owner or operator must take the following actions:
(i) Immediately bring the sea turtle aboard;
(ii) Handle the sea turtle in accordance with the procedures in paragraphs (b)(3) and (b)(4) of this section; and
(iii) Disentangle and remove the gear, or cut the line as close as
possible to the hook or entanglement, to remove the maximum amount of the gear from the sea turtle.
(3) Sea turtle resuscitation. If a sea turtle appears dead or comatose, the following actions must be taken:
(i) Place the sea turtle on its belly (on the bottom shell or
plastron) so that the sea turtle is right side up and its hindquarters
elevated at least 6 inches (15.24 cm) for a period of no less than 4
hours and no more than 24 hours. The amount of the elevation varies
with the size of the sea turtle; greater elevations are needed for larger sea turtles;
(ii) Administer a reflex test at least once every 3 hours. The test
is to be performed by gently touching the eye and pinching the tail of a sea turtle to determine if the sea turtle is responsive;
(iii) Keep the sea turtle shaded and damp or moist (but under no
circumstances place the sea turtle into a container holding water). A
watersoaked towel placed over the eyes, carapace and flippers is the most effective method of keeping a sea turtle moist; and
(iv) Return to the sea any sea turtle that revives and becomes
active in the manner described in paragraph (b)(4) of this section. Sea
turtles that fail to revive within the 24hour period must also be
returned to the sea in the manner described in paragraph (b)(4) of this section.
(4) Sea turtle release. After handling a sea turtle in accordance
with the requirements of paragraphs (b)(2) and (b)(3) of this section,
the sea turtle must be returned to the ocean after identification
unless NMFS requests the retention of a dead sea turtle for research.
In releasing a sea turtle the vessel owner or operator must:
(i) Place the vessel engine in neutral gear so that the propeller
is disengaged and the vessel is stopped, and release the sea turtle away from deployed gear; and
(ii) Observe that the turtle is safely away from the vessel before engaging the propeller and continuing operations.
(5) Other sea turtle requirements. No sea turtle, including a dead
turtle, may be consumed or sold. A sea turtle may be landed, offloaded,
transhipped or kept below deck only if NMFS requests the retention of a dead sea turtle for research.
4. In Sec. 660.33, paragraphs (f) and (g) are revised to read as follows:
Sec. 660.33 Western Pacific longline fishing restrictions. * * * * *
(f) Any owner or operator of a vessel registered for use under any
longline permit issued under Sec. 660.21 must use only offset circle
hooks sized 18/0 or larger, with a 10[deg] offset, when shallowsetting
north of the Equator (0[deg] lat.). As used in this paragraph, an
offset circle hook sized 18/0 or larger is one with an outer diameter
at its widest point is no smaller than 1.97 inches (50 mm) when
measured with the eye of the hook on the vertical axis (yaxis) and
perpendicular to the horizontal axis (xaxis). As used in this
paragraph, a 10[deg] offset is measured from the barbed end of the hook
and is relative to the parallel plane of the eyedend, or shank, of the hook when laid on its side.
(g) Any owner or operator of a vessel registered for use under any
longline permit issued under Sec. 660.21 must use only mackereltype
bait when shallowsetting north of the Equator (0[deg] lat.). As used
in this paragraph, mackereltype bait means a whole fusiform fish with
a predominantly blue, green or gray back and predominantly gray, silver or white lower sides and belly.
* * * * *
5. In Sec. 660.34, paragraphs (a), (c), and (d) are revised to read as follows:
Sec. 660.34 Protected species workshops.
(a) Each year, both the owner and the operator of a vessel
registered for use under any longline permit issued under Sec. 660.21
must attend and be certified for completion of a workshop conducted by
NMFS on interaction mitigation techniques for sea turtles, seabirds and other protected species.
* * * * *
(c) An owner of a vessel registered for use under any longline
permit issued under Sec. 660.21 must have a valid protected species
workshop certificate issued by NMFS to the owner of the vessel, in order to maintain or renew their vessel registration.
(d) An owner and an operator of a vessel registered for use under
any longline permit issued under Sec. 660.21 must have on board the
vessel a valid protected species workshop certificate issued by NMFS to the operator of the vessel, or a legible copy thereof.
[FR Doc. 0522633 Filed 111405; 8:45 am]
BILLING CODE 351022S
FOR FURTHER INFORMATION CONTACT Robert Harman, Sustainable Fisheries Division, PIR, NMFS, 8089442271.
14 CFR Part 39 40 CFR Part 52 14 CFR Part 71 33 CFR Part 165 50 CFR Part 679 26 CFR Part 1 40 CFR Part 180 47 CFR Part 73 50 CFR Part 17 33 CFR Part 117 44 CFR Part 67 50 CFR Part 648 14 CFR Part 97 33 CFR Part 100 40 CFR Part 63 26 CFR Part 301 50 CFR Part 622 39 CFR Part 111 40 CFR Part 300 44 CFR Part 65 50 CFR Part 660 40 CFR Part 271 40 CFR Parts 52 and 81 47 CFR Part 64 50 CFR Part 665 49 CFR Part 571 44 CFR Part 64 14 CFR Part 23 47 CFR Part 76 50 CFR Part 229