Browse: Departments   Dates   Agencies  

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

CFR Citation: 14 CFR Part 23

Docket ID: [Docket No. CE244, Special Condition 23-184A-SC]

NOTICE: RULES

ACTION: Airworthiness standards:

DOCUMENT ACTION: Amended final special conditions; request for comments.

SUBJECT CATEGORY: Special Condition; Avidyne Corporation, Inc.; Various Airplane Models; Protection of Systems for High Intensity Radiated Fields (HIRF)

DATES: The effective date of these special conditions is May 10, 2006. Comments must be received on or before August 21, 2006.

DOCUMENT SUMMARY: These amended special conditions are issued to Avidyne Corporation, 55 Old Bedford Road, Lincoln, MA 01773. This is an amendment to special condition 23184SC, which was published on May 23, 2006 (71 FR 29574), for installation of an EFIS manufactured by Avidyne on various models. The original issue left off the Cirrus Design Corporation SR22, which was the first model to be certified under the STC.

The airplanes listed under this multimodel approval will have novel and unusual design features when compared
[[Page 41105]]
to the state of technology envisaged in the applicable airworthiness standards. These novel and unusual design features include the installation of the Entegra II Avionics System, consisting of: (2) Model 7000003( ) Integrated Flight Displays (IFD), (2) Model 700 00011( ) Magnetometer/OAT sensors, and (1) Model 70000085000 Keyboard/Controller. These components are all manufactured by Avidyne Corporation, Inc. The applicable regulations do not contain adequate or appropriate airworthiness standards for the protection of these systems from the effects of high intensity radiated fields (HIRF). These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to the airworthiness standards applicable to these airplanes.

SUMMARY: Special conditions—; Avidyne Corp., Inc.; various airplane models,

SUPPLEMENTAL INFORMATION

The FAA has determined that notice and opportunity for prior public comment hereon are impracticable because the substance of these special conditions has been subject to the public comment process in several prior instances with no substantive comments received. The FAA, therefore, finds that good cause exists for making these special conditions effective upon issuance.

Comments Invited

Interested persons are invited to submit such written data, views, or arguments, as they may desire. Communications should identify the regulatory docket or notice number and be submitted in duplicate to the address specified above. All communications received on or before the closing date for comments will be considered by the Administrator. The special conditions may be changed in light of the comments received. All comments received will be available in the Rules Docket for examination by interested persons, both before and after the closing date for comments. A report summarizing each substantive public contact with FAA personnel concerning this rulemaking will be filed in the docket. Commenters wishing the FAA to acknowledge receipt of their comments submitted in response to this notice must include a self addressed, stamped postcard on which the following statement is made: ``Comments to Docket No. CE244.'' The postcard will be date stamped and returned to the commenter.

Background

In early 2006, the Avidyne Corporation, 55 Old Bedford Road, Lincoln, MA 01773, made an application to the FAA for a new Supplemental Type Certificate for airplane models listed under the type certification basis. The models are currently approved under the type certification basis listed in the paragraph headed ``Type Certification Basis.'' The proposed modification incorporates a novel or unusual design feature, such as a digital avionics system, that may be vulnerable to HIRF external to the airplane.

Type Certification Basis

Under the provisions of 14 CFR part 21, Sec. 21.101, Avidyne Corporation, must show that affected airplane models, as changed, continue to meet the applicable provisions, of the regulations incorporated by reference in Type Certificate Numbers listed below or the applicable regulations in effect on the date of application for the change. The regulations incorporated by reference in the type certificate are commonly referred to as the original ``type certification basis'' and can be found in the Type Certificate Numbers listed below. In addition, the type certification basis of airplane models that embody this modification will include Sec. Sec. 23.1301, 23.1309, 23.1311, and 23.1321, 23.1322 of Amendment 2349; exemptions, if any; and the terms of this special condition adopted by this rulemaking action.
Final Special Conditions [Approved model listPart 23 Class I & II (AC 23.13091C] Certification basis Aircraft make Aircraft model(s) Type certificate No. (see note 1) Aerostar Aircraft Corporation.... PA60600 (Aerostar A17WE......................... 14 CFR Part 23. 600), PA60601
(Aerostar 601), PA60
601P (Aerostar 601P),
PA60602P (Aerostar
602P).
Cessna Aircraft Company.......... 172R, 172S.............. 3A12.......................... ................... 182S, 182T, T182T....... 3A1314 CFR Part 23............ 14 CFR Part 23. 206H, T206H............. A4CE.......................... 14 CFR Part 23. T303.................... A34CE......................... 14 CFR Part 23. 310, 310A (USAF U3A), 3A10.......................... CAR 3. 310B, 310C, 310D, 310E
(USAF U3B), 310F,
310G, 310H, 310I, 310J, 310J1, 310K, 310L,
310N, 310P, E310H,
E310J, T310P, 310Q,
T310Q, 310R, T310R.
320, 3201, 320A, 320B, 3A25.......................... CAR 3. 320C, 320D, 320E, 320F
340, 340A, 335, 340,
340A.
336..................... A2CE.......................... CAR 3. 337, 337A (USAF O2B), A6CE.......................... CAR 3, 14 CFR Part 337B, 337C, 337D, 337E, 23. 337F, 337G, 337H, M337B (USAF O2A), P337H,
T337B, T337C, T337D,
T337E, T337F, T337G,
T337H, T337HSP.
Cirrus Design Corporation........ SR20, SR22.............. A00009CH...................... 14 CFR Part 23. Columbia Aircraft Manufacturing.. LC40550FG, LC42550FG.. A00003SE...................... 14 CFR Part 23. [[Page 41106]]
Commander Aircraft............... 112, 114, 112TC, 112B, A12SO......................... CAR 3. 112TCA, 114A, 114B,
114TC.
de Havilland Inc................. DHC2 Mk. I, DHC2 Mk. A806......................... CAR 3. II, DHC2 Mk. III.
Diamond Aircraft Industries...... DA 20A1, DA20C1....... TA4CH......................... 14 CFR Part 23. A40..................... A47CE......................... 14 CFR Part 21, 14 CFR Part 23. A42..................... A57CE......................... 14 CFR Part 21, 14 CFR Part 23. Maule Aerospace Technology, Inc.. Bee Dee M4, M5180C, 3A23.......................... CAR 3. MXT7160, M4, M5
200, MX7180A, M4C, M
5210C, MXT7180, M
4S, M5210TC, MX7
180B, M4T, M5220C,
MXT7420, M4180C, M
5235C, M7235B, M4
180S, M6180, M7
235A, M4180T, M6
235, M7235C M4210 M
7235 MX7180C, M4
210C, MX7235, M7
260, M4210S MX7180
MT7260, M4210T, MX
7420, M7260C,M4
220, MXT7180, M7
420AC, M4220C, MT7
235, MX7160C, M4
220S, M8235, MX7
180AC, M4220T, MX7
160.
Mooney Aircraft Corp............. M20, M20A, M20B, M20C, 2A3........................... CAR 3. M20D, M20E, M20F, M20G, M20J, M20K, M20L, M20M, M20R, M20S.
M22..................... A6SW.......................... CAR 3. Partenavia Costruzioni P 68, P 68B, P 68C, P A31EU......................... 14 CFR Part 23. Aeronauticas S.p.A. 68CTC, P 68
``OBSERVER'', AP68 TP
series 300, P68TC
``OBSERVER'', AP68TP
600, P68 ``OBSERVER 2''. The New Piper Aircraft, Inc...... PA28160, PA28150, PA
28180, PA28S160, PA
28S180, PA28235, PA
28140 2 PCLM, PA28
140 4 PCLM, PA28R180,
PA28R200, PA28R200,
PA28180, PA28235,
PA28151, PA28181,
PA28181, PA28161,
PA28161, PA28161,
PA28R201, PA28R
201T, PA28236, PA
28RT201, PA28RT201,
PA28RT201T, PA28
201T.
A32260, PA32300, PA A3SO.......................... CAR 3. 32S300, PA32R300, PA
32RT300, PA32RT300T,
PA32R301, PA32R301,
PA32R301T, PA32301,
PA32301T, PA32R301T.
PA30, PA39, PA40..... A1EA.......................... CAR 3. PA34200, PA34200T, A7SO.......................... CAR 3. PA34220T, PA34220T,
PA34220T.
PA44180, PA44180, PA A19SO......................... 14 CFR Part 23. 44180T.
PA46310P, PA46350P, A25SO......................... 14 CFR Part 23. PA46500TP.
Raytheon Aircraft Company........ A36, B36TC, G36......... 3A15.......................... CAR 3. 58 and 58A.............. 3A16.......................... CAR 3. 58P and 58PA, 58TC and A23CE......................... 14 CFR Part 23. 58TCA.
REVO, Incorporated............... Lake LA4, LA4A, LA4P, 1A13.......................... CAR 3, 14 CFR Part Lake LA4200, Lake 250. 23. SOCATAGroupe AEROSPATIALE...... TB 20, TB 10, TB 21, A51EU......................... 14 CFR Part 23. TB9, TB 200.
Twin Commander................... 500, 520, 560, 560A.... 6A1........................... CAR 3. Final Special Conditions [Approved model listPart 23 class III] Certification basis Aircraft make Aircraft model(s) Type certificate No. (see note 1) Aerostar Aircraft Corporation.... PA60700P (Aerostar A17WE......................... 14 CFR Part 23. 700P).
Cessna Aircraft Company.......... 208, 208A, 208B......... A37CE......................... 14 CFR Part 23. 401, 401A, 401B, 402, A7CE.......................... CAR 3. 402A, 402B, 402C, 411,
411A, 414, 414A, 421,
421A, 421B, 421C, 425.
404, 406................ A25CE......................... 14 CFR Part 23. 441..................... A28CE......................... 14 CFR Part 23. de Havilland Inc................. (Twin Otter) DHC61, A9EA.......................... CAR 3. DHC6100, DHC6200,
DHC6300.
Fairchild........................ SA26T, SA26AT, SA226 A5SW.......................... CAR 3. T, SA226AT, SA226
T(B), SA227AT, SA227
TT.
Mitsubishi Heavy Industries, Ltd. MU2B, MU2B10, MU2B A2PC.......................... CAR 3. 20, MU2B15, MU2B30,
MU2B35, MU2B25, MU
2B36, MU2B26.
[[Page 41107]]
MU2B25, MU2B35, MU A10SW......................... CAR 3. 2B26, MU2B36, MU2B
26A, MU2B36A, MU2B
40, MU2B60.
Partenavia Costruzioni ``SPARTACUS'', AP68TP A31EU......................... 14 CFR Part 23. Aeronauticas S.p.A. 600 ``VIATOR'', VA300.
Piaggio Aero Industries S.p.A.... P180................... A59EU......................... 14 CFR Part 23. Pilatus Aircraft Limited......... PC12, PC12/45......... A78EU......................... 14 CFR Part 23. PC6, PC6H1, PC6H2, 7A15.......................... CAR 3. PC6/350, PC6/350H1,
PC6/350H2, PC6/A, PC
6/AH1, PC6/AH2, PC6/
BH2, PC6/B1H2, PC6/
B2H2, PC6/B2H4, PC6/
CH2, PC6/C1H2.
The New Piper Aircraft, Inc...... PA31, PA31300, PA31 A20SO......................... CAR 3. 325, PA31350.
PA31P, PA31T, PA31T1, A8EA.......................... CAR 3. PA31T2, PA31T3, PA
31P350.
PA42, PA42720, PA42 A23SO......................... 14 CFR Part 23. 720R, PA421000.
Raytheon Aircraft Company........ A100 (U21F), A100A, A14CE......................... 14 CFR Part 23. A100C, B100.
F90..................... A31CE......................... 14 CFR Part 23. E50 (L23D, RL23D), 5A4........................... CAR 3. C50, F50, D50 (L23E),
G50, D50A H50, D50B,
J50, D50C, D50E, D50E
5990.
60, A60, B60............ A12CE......................... 14 CFR Part 23. 65, 65A901, A65, 65 3A20.......................... CAR3, 14 CFR Part A902, A658200, 65A90 23. 3, 6580, 65A904, 65
A80, 65A808800, 65
B80, 6588, 6590, 65
A90, 70, B90, C90,
C90A, E90, H90.
SOCATAGroupe AEROSPATIALE...... TBM 700................. A60EU......................... 14 CFR Part 23. Twin Commander................... 560F, 681, 680, 690, 2A4........................... CAR 3. 680E, 685, 680F, 690A,
720, 690B, 680FL, 690C, 680FL(P), 690D, 680T,
695, 680V, 695A, 680W,
695B.
500A, 500B, 500U, 560 6A1........................... CAR 3. E, 500S.
700..................... A12SW......................... 14 CFR Part 23.

Note 1: The Certification Basis listing refers to the Certification Basis listed on the Type Certificate Data Sheet for each model. The modified aircraft will be compliant with the latest amendment of the regulations applicable to the modification. In particular, the revised Certification Basis will incorporate Sec. Sec. 23.1301, 23.1309, 23.1311, 23.1321, 23.1322, 23.1353 at amendment 49, and the terms of this Special Condition. Also, each model will be added to the Approved Model List (AML) using a prototyping approach, where the model is only added to the Supplemental Type Certificate as installations are accomplished and evaluated on each model. This combined special condition is being issued simply to avoid having to reissue a repeated Special Condition document for each model listed on this multimodel approval.

Discussion

If the Administrator finds that the applicable airworthiness standards do not contain adequate or appropriate safety standards because of novel or unusual design features of an airplane, special conditions are prescribed under the provisions of Sec. 21.16.

Special conditions, as appropriate, as defined in Sec. 11.19, are issued in accordance with Sec. 11.38 after public notice and become part of the type certification basis in accordance with Sec. 21.101 (b)(2) of Amendment 2169.

Special conditions are initially applicable to the model for which they are issued. Should the applicant apply for a supplemental type certificate to modify any other model already included on the same type certificate to incorporate the same novel or unusual design feature, the special conditions would also apply to the other model under the provisions of Sec. 21.101.

Novel or Unusual Design Features

Avidyne Corporation plans to incorporate certain novel and unusual design features into an airplane for which the airworthiness standards do not contain adequate or appropriate safety standards for protection from the effects of HIRF. These features include Electronic Flight Instrument Systems (EFIS), which are susceptible to the HIRF environment, that were not envisaged by the existing regulations for this type of airplane.
Protection of Systems from High Intensity Radiated Fields (HIRF)

Recent advances in technology have given rise to the application in aircraft designs of advanced electrical and electronic systems that perform functions required for continued safe flight and landing. Due to the use of sensitive solidstate advanced components in analog and digital electronics circuits, these advanced systems are readily responsive to the transient effects of induced electrical current and voltage caused by the HIRF. The HIRF can degrade electronic systems performance by damaging components or upsetting system functions.

Furthermore, the HIRF environment has undergone a transformation that was not foreseen when the current requirements were developed. Higher energy levels are radiated from transmitters that are used for radar, radio, and television. Also, the number of transmitters has increased significantly. There is also uncertainty concerning the effectiveness of airframe shielding for HIRF. Furthermore, coupling to cockpitinstalled equipment through the cockpit window apertures is undefined.

The combined effect of the technological advances in airplane design and the changing environment has resulted in an increased level of vulnerability of electrical and electronic systems required for the continued safe flight and landing of the airplane. Effective measures against the effects of exposure to HIRF must be provided by the design and installation of these systems. The accepted maximum energy [[Page 41108]]
levels in which civilian airplane system installations must be capable of operating safely are based on surveys and analysis of existing radio frequency emitters. These special conditions require that the airplane be evaluated under these energy levels for the protection of the electronic system and its associated wiring harness. These external threat levels, which are lower than previous required values, are believed to represent the worst case to which an airplane would be exposed in the operating environment.

These special conditions require qualification of systems that perform critical functions, as installed in aircraft, to the defined HIRF environment in paragraph 1 or, as an option to a fixed value using laboratory tests, in paragraph 2, as follows:
(1) The applicant may demonstrate that the operation and operational capability of the installed electrical and electronic systems that perform critical functions are not adversely affected when the aircraft is exposed to the HIRF environment defined below: Field strength (volts per meter) Frequency
Peak Average 10 kHz100 kHz.................................... 50 50 100 kHz500 kHz................................... 50 50 500 kHz2 MHz..................................... 50 50 2 MHz30 MHz...................................... 100 100 30 MHz70 MHz..................................... 50 50 70 MHz100 MHz.................................... 50 50 100 MHz200 MHz................................... 100 100 200 MHz400 MHz................................... 100 100 400 MHz700 MHz................................... 700 50 700 MHz1 GHz..................................... 700 100 1 GHz2 GHz....................................... 2000 200 2 GHz4 GHz....................................... 3000 200 4 GHz6 GHz....................................... 3000 200 6 GHz8 GHz....................................... 1000 200 8 GHz12 GHz...................................... 3000 300 12 GHz18 GHz..................................... 2000 200 18 GHz40 GHz..................................... 600 200 The field strengths are expressed in terms of peak rootmeansquare (rms) values.
or,
(2) The applicant may demonstrate by a system test and analysis that the electrical and electronic systems that perform critical functions can withstand a minimum threat of 100 volts per meter, electrical field strength, from 10 kHz to 18 GHz. When using this test to show compliance with the HIRF requirements, no credit is given for signal attenuation due to installation.

A preliminary hazard analysis must be performed by the applicant, for approval by the FAA, to identify either electrical or electronic systems that perform critical functions. The term ``critical'' refers to functions, whose failure would contribute to, or cause, a failure condition that would prevent the continued safe flight and landing of the airplane. The systems identified by the hazard analysis that perform critical functions are candidates for the application of HIRF requirements. A system may perform both critical and noncritical functions. Primary electronic flight display systems, and their associated components, perform critical functions such as attitude, altitude, and airspeed indication. The HIRF requirements apply only to critical functions.

Compliance with HIRF requirements may be demonstrated by tests, analysis, models, similarity with existing systems, or any combination of these. Service experience alone is not acceptable since normal flight operations may not include an exposure to the HIRF environment. Reliance on a system with similar design features for redundancy as a means of protection against the effects of external HIRF is generally insufficient since all elements of a redundant system are likely to be exposed to the fields concurrently.

Applicability

As discussed above, these special conditions are applicable to one modification to the airplane models listed under the heading ``Type Certification Basis.'' Should Avidyne Corporation, apply to extend this modification to include additional airplane models, the special conditions would extend to these models as well under the provisions of Sec. 21.101.

Conclusion

This action affects only certain novel or unusual design features of one modification to several models of airplanes. It is not a rule of general applicability and affects only the applicant who applied to the FAA for approval of these features on the airplane.

The substance of these special conditions has been subjected to the notice and comment period in several prior instances and has been derived without substantive change from those previously issued. It is unlikely that prior public comment would result in a significant change from the substance contained herein. For this reason, and because a delay would significantly affect the certification of some airplane models, the FAA has determined that prior public notice and comment are unnecessary and impracticable, and good cause exists for adopting these special conditions upon issuance. The FAA is requesting comments to allow interested persons to submit views that may not have been submitted in response to the prior opportunities for comment described above.
List of Subjects in 14 CFR Part 23

Aircraft, Aviation safety, Signs and symbols.
Citation
The authority citation for these special conditions is as follows:

Authority: 49 U.S.C. 106(g), 40113 and 44701; 14 CFR 21.16 and 21.101; and 14 CFR 11.38 and 11.19.
The Special Conditions
Accordingly, pursuant to the authority delegated to me by the Administrator, the following special conditions are issued as part of the type certification basis for airplane models listed under the ``Type Certification Basis'' heading modified by Avidyne Corporation, to add an EFIS.

1. Protection of Electrical and Electronic Systems from High Intensity Radiated Fields (HIRF). Each system that performs critical functions must be designed and installed to ensure that the operations, and operational capabilities of these systems to perform critical functions, are not adversely affected when the airplane is exposed to high intensity radiated electromagnetic fields external to the airplane.

2. For the purpose of these special conditions, the following definition applies: Critical Functions: Functions whose failure would contribute to, or cause, a failure condition that would prevent the continued safe flight and landing of the airplane.

Issued in Kansas City, Missouri on July 14, 2006. Patrick R. Mullen,
Acting Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. E611562 Filed 71906; 8:45 am]
BILLING CODE 491013P

FOR FURTHER INFORMATION CONTACT Wes Ryan, Aerospace Engineer, Standards Office (ACE110), Small Airplane Directorate, Aircraft Certification Service, Federal Aviation Administration, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone (816) 3294123.