Browse: Departments   Dates   Agencies  

DOCUMENT ID: [A-485-806]

NOTICE: NOTICES

ACTION: Antidumping:

SUBJECT CATEGORY: Certain Hot-Rolled Carbon Steel Flat Products from Romania: Final Results of Antidumping Duty Administrative Review

EFFECTIVE DATES: (December 17, 2007.

DOCUMENT SUMMARY: On August 9, 2007, the Department of Commerce published the preliminary results of the administrative review of the antidumping duty order on certain hotrolled carbon steel flat products from Romania. This review covers sales of subject merchandise made by Mittal Steel Galati S.A. The period of review is November 1, 2005, through October 31, 2006. Based on our analysis of comments received, we have made a change to our calculations; this change did not result in a change to the margin for Mittal Steel Galati S.A. Therefore, these final results are identical to our preliminary results. The final results are listed below in the ``Final Results of Review'' section.

SUMMARY: Hot-rolled carbon steel flat products from—; Romania,

SUPPLEMENTAL INFORMATION

On August 9, 2007, the Department of Commerce (the Department) published the preliminary results of the antidumping duty
administrative review of certain hotrolled carbon steel flat products from Romania (Certain HotRolled Carbon Steel Flat Products From Romania: Preliminary Results of the Antidumping Duty Administrative Review, 72 FR 44821 (August 9, 2007) (Preliminary Results)). The review covers one manufacturer, Mittal Steel Galati S.A. (MS Galati).

We invited parties to comment on our preliminary results of review. MS Galati and one domestic interested party, United States Steel Corporation, filed case briefs on September 12, 2007. MS Galati and two domestic interested parties, United States Steel Corporation and Nucor Corporation, filed rebuttal briefs on September 19, 2007.

On October 31, 2007, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act), the International Trade Commission determined that revocation of the antidumping duty order on certain hotrolled carbon steel flat products from Romania would not be likely to lead to continuation or recurrence of material injury. See Hot Rolled Steel Products from Argentina, China, India, Indonesia, Kazakhstan, Romania, South Africa, Taiwan, Thailand, and Ukraine, 72 FR 61676 (October 31, 2007), and USITC Publication 3956 (October 2007), entitled Hot Rolled Steel Products from Argentina, China, India, Indonesia, Kazakhstan, Romania, South Africa, Taiwan, Thailand, and Ukraine: Investigation Nos. 701 TA 404 408 and 731 TA 898 902 and 904 908 (Review). As a result of this determination, the Department revoked the antidumping duty order on certain hotrolled carbon steel flat products from Romania, effective as of November 29, 2006. See Certain HotRolled Carbon Steel Flat Products from Argentina, Kazakhstan, Romania, and South Africa: Revocation of Antidumping Duty and Countervailing Duty Orders, 72 FR 65293 (November 20, 2007). Scope of the Order

The products covered by the order are certain hotrolled carbon steel flat products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other nonmetallic substances, in coils (whether or not in successively superimposed layers), regardless of thickness, and in straight length, of a thickness of less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flatrolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not less than 4.0 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this order.

Specifically included within the scope of this order are vacuum degassed, fully stabilized (commonly referred to as interstitialfree (IF)) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with microalloying levels of elements such as titanium or niobium (also commonly referred to as columbium), or both, added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with microalloying levels of elements such as chromium, copper, niobium, vanadium, and molybdenum. The substrate for motor lamination steels contains microalloying levels of elements such as silicon and aluminum.

Steel products to be included in the scope of this order, regardless of definitions in the Harmonized Tariff Schedule of the United States (HTSUS), are products in which: (i) Iron predominates, by weight, over each of the other contained elements; (ii) the carbon content is 2 percent or less, by weight; and (iii) none of the elements listed below exceeds the quantity, by weight, respectively indicated: 1.80 percent of manganese, 2.25 percent of silicon, 1.00 percent of copper, 0.50 percent of aluminum, 1.25 percent of chromium, 0.30 percent of cobalt, 0.40 percent of lead, 1.25 percent of nickel, 0.30 percent of tungsten, 0.10 percent of molybdenum, 0.10 percent of niobium, 0.15 percent of vanadium or 0.15 percent of zirconium.

All products that meet the physical and chemical description provided above are within the scope of this order unless otherwise excluded. The following products, by way of example, are outside or specifically excluded from the scope of this order: Alloy hotrolled steel products in which at least one of the chemical elements exceeds those listed above (including, e.g., American Society for Testing and Materials (ASTM) specifications A543, A387, A514, A517, A506); Society of Automotive Engineers (SAE)/American Iron & Steel Institute (AISI) grades of series 2300 and higher; ball bearing steels, as defined in the HTSUS; tool steels, as defined in the HTSUS; silicomanganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 2.25 percent; ASTM specifications A710 and A736; USS abrasionresistant steels (USS AR 400, USS AR 500); all products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTM A506, A507); nonrectangular shapes, not in coils, which are the result of having been processed by cutting or stamping and which have assumed the character of articles or products classified outside chapter 72 of the HTSUS.

The merchandise subject to this order is classified in the HTSUS at the following subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, and 7211.19.75.90. Certain hotrolled carbon steel flat products covered by this order, including vacuum degassed fully stabilized, high strength low alloy, and the substrate for motor lamination steel, may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00.

Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this proceeding is dispositive.

Analysis of Comments Received

All issues raised in the case and rebuttal briefs by parties to this review are addressed in the ``Issues and
[[Page 71359]]
Decision Memorandum'' (Decision Memorandum) from Stephen J. Claeys, Deputy Assistant Secretary for Import Administration, to David M. Spooner, Assistant Secretary for Import Administration, dated December 7, 2007, which is hereby adopted by this notice. A list of the issues which the parties have raised and to which we have responded is attached to this notice as an appendix. Parties can find a complete discussion of all issues raised in this review and corresponding recommendations in this public memorandum which is on file in Import Administration's Central Records Unit, Room B099 of the main Department building. In addition, a complete version of the Decision Memorandum is available on the Internet at http://ia ita.doc.gov/frn/ index.html. The paper copy and electronic version of the Decision Memorandum are identical in content.

Changes Since the Preliminary Results

Based on our analysis of comments received, we have made a methodological change to our calculations as reflected in our Preliminary Results (see Comment 1 of the Decision Memorandum). Final Results of Review

As a result of our review, we determine that the following weightedaverage percentage margin exists for the period November 1, 2005, through October 31, 2006:
Manufacturer/exporter Margin (percent) Mittal Steel Galati S.A............................. 11.02 Assessment Rate

The Department will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries. We intend to issue appropriate assessment instructions directly to CBP 15 days after publication of these final results of review. In accordance with 19 CFR 351.212(b)(1), we have calculated an importerspecific assessment rate by dividing the total dumping duties due by the entered value of sales we analyzed. We will direct CBP to liquidate the appropriate entries at this rate. See 19 CFR 351.212(b)(1).

The Department clarified its ``automatic assessment'' regulation on May 6, 2003 (68 FR 23954). This clarification will apply to entries of subject merchandise during the period of review produced by the company included in these final results of review for which the reviewed company did not know its merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the allothers rate if there is no rate for the intermediate company(ies) involved in the transaction. For a full discussion of this clarification, see Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003). CashDeposit Requirements

Because the Department has revoked the order as discussed in the Background section, there will be no cashdeposit requirements for entries of this merchandise on or after November 29, 2006.

Notification

This notice also serves as the final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and in the subsequent assessment of double antidumping duties.

This notice also serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return/destruction or conversion to judicial protective order of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Failure to comply is a violation of the APO.

These final results of review are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

Dated: December 7, 2007.
David M. Spooner,
Assistant Secretary for Import Administration.
Appendix
Comment 1: Date of Sale
Comment 2: Offsetting of Negative Margins

FOR FURTHER INFORMATION CONTACT Dave Dirstine or Richard Rimlinger, AD/
[[Page 71358]]
CVD Operations, Office 5, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482 4033 and (202) 4824477, respectively.