200020012002200320042005200620072008
Pages:
«<45678>»
Part V: Department of Transportation, Federal Aviation Administration,
Published: 2000-05-26
This amendment adopts a new airworthiness directive (AD),
applicable to certain McDonnell Douglas Model DC1010F, DC1015, DC
1030, DC1030F, and DC1040 series airplanes, and Model MD11 and
11F series airplanes, that requires a determination be made of whether,
and at what locations, metallized polyethyleneteraphthalate (MPET)
insulation blankets are
RULES: Pilatus Aircraft Ltd.,
Published: 2000-06-02
This document adopts a new airworthiness directive (AD) that
applies to all Pilatus Aircraft Ltd. (Pilatus) Models PC12 and PC12/
45 airplanes that are equipped with pneumatic deicing boots. This AD
requires you to revise the Airplane Flight Manual (AFM) to include
requirements for activation of the airframe pneumatic deicing boots.
This AD is the
RULES: McDonnell Douglas,
Published: 2000-08-08
This amendment supersedes an existing airworthiness directive
(AD), applicable to all McDonnell Douglas Model DC9, Model MD9030,
Model 717200, and Model MD88 airplanes, that currently requires
inspecting the general condition of the jackscrew assembly and the area
around the jackscrew assembly to detect the presence of metal shavings
and flakes.
PROPOSED RULES: Saab,
Published: 2000-06-13
This document revises an earlier proposed airworthiness
directive (AD), applicable to certain Saab Model SAAB 340B and SAAB
2000 series airplanes, that would have superseded an existing AD. That
AD currently requires various inspections of fluorescent lamps and
lampholders in the cabin area for discrepancies; corrections, if
necessary; and
RULES: Airbus,
Published: 2000-06-19
This amendment supersedes an existing airworthiness directive
(AD), applicable to certain Airbus Model A319, A320, and A321 series
airplanes, that currently requires revising the FAAapproved Airplane Flight Manual (AFM) to increase monitoring of the
[[Page 37846]]
flight path of the airplane to detect certain software anomalies of the
flight
RULES: Airbus,
Published: 2000-06-23
This amendment supersedes an existing airworthiness directive
(AD), applicable to certain Airbus Model A300, A300600, and A310
series airplanes, that currently requires inspections to detect cracks
in the lower spar axis of the nacelle pylon between ribs 9 and 10, and
repair, if necessary. The existing AD also provides for optional
modification of
RULES: Boeing,
Published: 2000-07-13
This amendment adopts a new airworthiness directive (AD) that
is applicable to certain Boeing Model 777 series airplanes. This action
requires a onetime measurement of the electrical bonding resistance
between the wing spar connectors of the fuel quantity indicating system
(FQIS) and the spar structure, installation of bonding jumpers, a one
time
RULES: McDonnell Douglas,
Published: 2000-12-27
This document corrects a typographical error that appeared in
airworthiness directive (AD) 20001517 that was published in the
Federal Register on August 8, 2000 (65 FR 48368). The typographical
error resulted in the omission of an airplane model from paragraph (c)
of the AD. This AD is applicable to certain McDonnell Douglas Model DC
981 (MD81),
PROPOSED RULES: Empresa Brasileira de Aeronautica S.A.,
Published: 2000-12-08
This document proposes the adoption of a new airworthiness
directive (AD) that is applicable to certain EMBRAER Model EMB145
series airplanes. This proposal would require inspection of the bolts
on the hinge fittings that attach the spring tab and the servo tab to
the rear spar of the elevators for evidence of loosening; inspection of
the region
RULES: British Aerospace,
Published: 2000-11-30
This amendment adopts a new airworthiness directive (AD) that
applies to all British Aerospace HP137 Mk1 and Jetstream series 200
airplanes. This AD requires you to inspect the vertical stabilizer skin
for disbonding, corrosion, cracks, and loose rivets, and repair any
vertical stabilizer skin where discrepancies are found. This AD is the
result
RULES: Pratt & Whitney,
Published: 2000-11-20
This amendment adopts a new airworthiness directive (AD) that
is applicable to certain Pratt & Whitney JT9D series turbofan engines.
This AD will require installation of an improved No. 4 bearing internal
oil pressure tube, initial and repetitive inspections of the No. 4
bearing oil pressure tube for turbine exhaust case (TEC) strut
clearance and
RULES: Boeing,
Published: 2000-11-07
This amendment adopts a new airworthiness directive (AD) that
is applicable to certain Boeing Model 747100, 200B, 200C, 200F, and
300 series airplanes delivered in or modified into the stretched upper
deck configuration. This action requires a onetime inspection to
detect chafing between certain engine thrust control cables and certain
cable
RULES: Boeing,
Published: 2000-10-26
This amendment supersedes an existing airworthiness directive
(AD), applicable to all Boeing Model 737 series airplanes, that
currently requires revising the FAAapproved Airplane Flight Manual
(AFM). This new amendment revises the AFM procedure in the existing AD
to simplify the instructions for correcting a jammed or restricted
flight control
RULES: Bombardier,
Published: 2000-10-16
This amendment revises an existing airworthiness directive
(AD), applicable to certain Bombardier Model CL6002B19 series
airplanes, that currently requires installation of shields for the
aileron quadrants in the wheel bay of the main landing gear (MLG). This
amendment revises the compliance time for the requirements of that AD.
The actions
PROPOSED RULES: Bell,
Published: 2000-10-02
This document proposes adopting a new airworthiness directive
(AD) for Bell Helicopter Textron, Inc. (BHTI) Model 204B helicopters.
The AD would require replacing any main rotor mast assembly (mast),
part number (P/N) 204011450001, within 25 hours timeinservice
(TIS). This proposal is prompted by the crash of a restricted category
Model UH1B
PROPOSED RULES: Eurocopter Deutschland GmbH,
Published: 2000-09-18
This document proposes the adoption of a new airworthiness
directive (AD) for Eurocopter Deutschland GmbH (ECD) Model EC135 P1 and
EC135 T1 helicopters. This proposal would require inspecting the
hydraulic line shielding hose (hose), replacing any unairworthy hose
with an airworthy hose, and installing a nylon cable tie. This proposal
is prompted
Part II: Department of Transportation, Federal Aviation Administration,
Published: 2000-09-11
This document proposes the adoption of a new airworthiness
directive (AD) for Bell Helicopter Textron Canada (BHTC) Model 206A, B,
L, L1, and L3 helicopters. This proposal would require inspecting the
collective lever assembly (assembly) for a raised forging boss,
inspecting the assembly for adequate clearance between the collective
lever and the
RULES: Fairchild,
Published: 2000-09-01
This amendment adopts a new airworthiness directive (AD) that
applies to certain Fairchild Aircraft, Inc. (Fairchild) SA226 and SA227
series airplanes equipped with certain Ozone Industries, Inc., main
landing gear (MLG) assemblies. This AD requires you to repetitively
inspect the MLG drag brace assembly (consists of both brace and links)
for
PROPOSED RULES: Dornier,
Published: 2000-08-29
This document proposes the supersedure of an existing
airworthiness directive (AD), applicable to all Dornier Model 328100
series airplanes, that currently requires revising the Airplane Flight
Manual (AFM) to provide the flightcrew with additional information
regarding procedures to ensure complete pressurization of the hydraulic
lines for the
RULES: Airbus,
Published: 2000-05-24
This amendment supersedes an existing airworthiness directive
(AD), applicable to all Airbus Model A300 B2, A300 B2K, A300 B2200,
A300 B4, A300 B4100, and A300 B4200 series airplanes, that currently
requires certain structural inspections and modifications. This
amendment requires that those inspections be accomplished on additional
airplanes.
RULES: Sikorsky,
Published: 2000-08-16
This document publishes in the Federal Register an amendment
adopting Airworthiness Directive (AD) 20001152, which was sent
previously to all known U.S. owners and operators of Sikorsky Aircraft
Corporation (Sikorsky) Model S76 series helicopters by individual
letters. This AD requires determining the serial number (S/N) of each
main rotor blade
PROPOSED RULES: Boeing,
Published: 2000-08-10
This document revises an earlier proposed airworthiness
directive (AD), applicable to certain Boeing Model 737 series
airplanes, that would have required inspections of certain bonded skin
panels to detect delamination of the skin doublers (tear straps) from
the skin panels; and followon corrective actions, if necessary. That
proposal was prompted
PROPOSED RULES: Learjet,
Published: 2000-06-08
This document proposes the adoption of a new airworthiness
directive (AD) that is applicable to all Learjet Model 35, 35A, 36, and
36A series airplanes. This proposal would require revision of the
Airplane Flight Manual (AFM) to add procedures for donning the
flightcrew oxygen masks when the cabin altitude warning horn is
activated. This action is
PROPOSED RULES: Gulfstream,
Published: 2000-06-14
This action withdraws a notice of proposed rulemaking (NPRM)
that proposed a new airworthiness directive (AD), applicable to all
Gulfstream G1159 (GII), G1159A (GIII), and G1159B (GIIB) series
airplanes. That action would have required a onetime inspection to
detect corrosion of the material layers of the lower aft fuselage skin
in Fuselage
PROPOSED RULES: Raytheon,
Published: 2000-06-19
This document proposes the adoption of a new airworthiness
directive (AD) that is applicable to certain Raytheon Model DH.125,
Model HS.125, Model BH.125, Model BAe.125 Series 800A, Model Hawker
800, Model Hawker 800XP, and Model Hawker 1000 series airplanes. This
proposal would require leak checks and inspections for corrosion of the
pitot/static